Sitemap

Categories

• Beaters, Bowls, Hooks, Whips, Knives
  • Beaters, 4 Wing
    • Four Wing Beater 30 qt bowl 40 qt mixer
    • Four Wing Beater 30-40qt bowl
    • Four Wing Beater 60 qt Bowl 80 qt mixer
    • Four Wing Beater For 12 Quart Mixer
    • Four Wing Beater for 20 qt. bowl
    • Four Wing Beater for 80 qt. bowl
  • Beaters, Batter
    • 30 & 40 Qt Beater for 60+ & 80+ Qt Mixer
    • 60 Quart Flat Beater for 80 Quart Mixer
    • 80 Quart Paddle
    • BATTER BEATER
    • Batter Beater 12 Qt. bowl,(20 Qt. Mixer)
    • BATTER BEATER 5 QT
    • BATTER BEATER, 20QT  (NEWER THAN 84)
    • BATTER BEATER, 30 Quart for 40 Quart
    • BATTER BEATER, 40 Quart
    • Beater for 20 Qt bowl & 30- 40 Qt Mixer
    • FLAT BEATER 12 QT
  • Beaters, Sweet Dough
    • Sweet Dough Beater For 12 Quart Mixer
    • Sweet Dough Beater for 20-30 qt. bowl
    • Sweet Dough Beater for 20-qt Bowl
    • Sweet Dough Beater For 30 & 40 qt Bowl
    • Sweet Dough Beater for 30+ Qt Bowl
    • Sweet Dough Beater for 60-qt Bowl
    • Sweet Dough Beater for 80 qt. bowl
    • Sweet Dough Beater, 12-qt Bowl
  • Bowl Scrapers
    • Bowl Scraper 30 quart bowl- 60 qt mixer
    • Bowl Scraper for 20-qt Bowl
    • Bowl Scraper For 30 Quart Mixer
    • Bowl Scraper for 60-qt Bowl
    • Bowl Scraper for 80-qt Bowl
  • Bowl Trucks & Adapters
    • Bowl Dolly 60 qt. bowl for 60-80qt mixer
    • Bowl Truck 30&40qt for 60&80 qt
    • Bowl Truck Adaptor 30 qt for 60 qt mixer
    • Bowl Truck for 30-qt Bowl 40 -qt mixer
    • Bowl Truck for 80 qt. bowl
  • Bowls, Stainless Steel, Mixing
    • 20 QT BOWL, SS
    • 20 Quart Bowl for 30 or 40 Quart Mixer
    • 30 Quart Bowl for 60 Quart Mixer
    • 40 Quart Bowl for 80 Quart Mixer
    • 60 Quart Bowl for 80 Quart Mixer
    • 60 QUART STAINLESS STEEL MIXING BOWL
    • 8 Quart Mixing Bowl
    • 80 Quart Stainless Steel Bowl
    • BOWL, 40 LITER (p)
    • BOWL, S/S 12QT
    • BOWL, SS, 12QT FOR 20QT
    • MIXER BOWL 30 QUART FOR 40 QUART
    • MIXING BOWL
  • Dough Hooks
    • 12 Quart Dough Hook
    • 12 Quart Dough Hook for 20 Quart Mixer
    • 20 Qt Dough Hook for 30 & 40 Qt Mixer
    • 20 Quart Dough Hook
    • 30 Qt FOR 40 Qt Dough Hook (J STYLE)
    • 30-40 Qt Bowl Dough Hook for 60+80+Mixer
    • 40 Quart Dough Hook
    • Dough Hook for 80 Qt. Mixer
    • Dough Hook, 60 Qt
  • Extension Rings, Splash
    • 20QT FOR 30-40QT SPLASH COVER, EXT RING
    • Extension Ring for 60-qt Bowl
    • Splash Ring For 30 to 80 qt Mixer
    • Splash Ring For 80 Quart Mixer
  • Pastry Knives
    • Pastry Knife 20 qt bowl(30-40 qt mixer)
    • Pastry Knife for 12 qt bowl 20 qt. mixer
    • Pastry Knife For 12 Quart Mixer
    • Pastry Knife for 30+ Qt Bowl
    • Pastry Knife for 30-40 qt bowl
    • Pastry Knife for 60-qt Bowl
    • Pastry Knife, 20-qt Bowl
    • Pastry Knife, for 80 qt. bowl
  • Whips, Stainless Steel, Wire
    • 20 Quart Wire Whip
    • SS Wire Whip for 80-qt Bowl
    • Stainless Steel Wire Whip
    • Stainless Steel Wire Whip 12 for 20
    • Wire Whip 30 Quart
    • Wire Whip for 40+ Qt Bowl
    • WIRE WHIP, 12QT
    • WIRE WHIP, 60 QT
• Chopper Parts
  • BOWL COVER ASSEM. BC-14
  • Knob Assembly. ADJ Spacer with Stud
  • SCREW, M5-0.8 X 16
  • BC14 Bowl Cutter
    • Bowl Cover Assembly
      • BOWL COVER SUPPORT
      • COMB, BC-14
      • COVER, BC14 BLADE (p)
      • COVER, SCREW HEAD
      • Deflector, BC14
      • LABEL, "DANGER"(SLICER)
      • LOCKING PIN, SHARPENER
      • NUT, COMB RELEASE
      • PLATE COMB
      • SCR, SOCHD M5-0.8x16mm (p)
      • SCR,SOCHD M12-1.75 x 45mm
      • SCREW
      • Screw, SOCHD M6-1X16MM
      • WSHR, M12
    • Bowl Cover/Start-Start Switch Latching Assembly
      • BEARING, 608-2Z
      • BOWL,BC-14
      • BRKT, SWITCH
      • COVER,BOWL COVER LOCK (p)
      • GEAR, WORM (LOCK)(p)
      • JOINT
      • KNOB, BOWL COVER LOCK
      • KNOB- SWITCH- ON/OFF
      • LIGHT,PILOT 115v (p)
      • LIGHT,PILOT 220V (p)
      • NUT, HEX
      • NUT, WORM GEAR
      • O-RING
      • ON/OFF SWITCH
      • PIN, BEARING
      • RING, RET. (N5000-86)(p)
      • ROD, ON-OFF (p)
      • SCR,SOCHD M5-.8 x 20mm
      • Screw, SOCHD M6-1X16MM
      • Set Screw
      • SHAFT, BOWL COVER LOCK (p)
      • SPACER
      • SSCR, M8-1.25x10mm
    • Electrical Component Assembly
      • BEARING WASHER
      • CAP, 115V 30MF (p)
      • CAP, 220V 10MF (p)
      • CB,3.5 AMP (p)
      • CIRCUIT BREAKER 120V (p)
      • CORD
      • COVER,BC14 BOTTOM (p)
      • ELECTRIC CORD
      • FOOT, Extension
      • HOLDER,CAPACITOR
      • LABEL, "DANGER"(SLICER)
      • NUT, HEX
      • NUT,8MMx1.25 PITCH
      • RELAY 115 volt
      • SCR,PPHD M6 x 10mm (DIN7985)
      • SCR,SOCHD M6-1.0x20mm
      • STRAIN, RELIEF
      • WASHER, M6
    • Knife Shaft & Support Assembly
      • "E" RING EXTERNAL
      • "E" RING EXTERNAL 11-42-0050
      • BALL BEARING
      • BEARING, 62/28-2RS (BC14)
      • BELT, BLADE SHAFT
      • BLADE SETS
      • BUSHING (p)
      • COVER,L.SIDE
      • COVER,R.SIDE (HOLE)
      • KEY
      • KEY, 70mm LONG (p)
      • KNOB, CUTTER
      • LABEL, "DANGER"(SLICER)
      • LABEL,"START-STOP" (p)
      • NUT, 20mm
      • NUT, LOCK, HEX M8-1.25
      • NUT,BLADE SUPPORT
      • O-RING
      • PIN, BOWL LOCK
      • PLATE, BOWL LOCK
      • PUL,DRIVEN (B.SHAFT)
      • RING,RET.  10-100-0570
      • RING,RET.  11-100-0280
      • ROD, BOWL REMOVAL SAFETY SWITCH
      • SCR, SOCHD M5-0.8x16mm (p)
      • SCR,SOCHD M6-1.0x20mm
      • SCREW (p)
      • SEAL
      • SET SCREW
      • SHAFT,BLADE (p)
      • SHAFT,BOWL DRIVE (p)
      • SNAP RING, INTERNAL 10-100-0460
      • SPACER,BLADE ASSEMBLY
      • SPRING
      • SPRING
      • SUPPORT, BOWL
      • SUPPORT, SHAFT (RIGHT)(62/28DU)
      • SUPPORT,BLADE
      • SUPPORT,BRG (LEFT)(6204DU)
      • SUPPORT,COVER SHAFT (p)
      • WASHER, M6
    • Motor Mounting & Bowl Drive Assembly
      • BEARING WASHER
      • BELT, SMALL
      • BOLT, BELT TENSION
      • BRKT,BOWL SWITCH (p)
      • BRKT,MOTOR ADJ.
      • BUSHING, PIVOT
      • COLLAR
      • GEAR BOX
      • GROMMET
      • KEY 5MM SQ. X 20 LG, ROUNDED BOTH ENDS
      • MOTOR, 1/2 HP 220V/50
      • NUT, WING M8-1.25
      • NUT,8MMx1.25 PITCH
      • NUT,M4
      • PUL,DRIVE (B.SHAFT)
      • PUL,DRIVE (GEARBOX)
      • PUL,DRIVEN (GEARBOX)
      • ROD,MOTOR MOUNT
      • ROD,MTR. MOUNT BRKT.
      • SAFETY SWITCH, BOWL
      • SCREW
      • SCREW, PAN SLOTTED HD M4-.7 X 25
      • SCREW, PAN SLOTTED HD M5-.8 X 10
      • SET SCREW
      • SPACER
      • SPRING, TAKE-UP (LONG)
      • SPRING, TAKE-UP (SHORT)
      • SSCR, M5-.8 x 5mm
      • WSHR, M12
  • BC18 Bowl Cutter
    • Blade Shaft Assembly
      • BEARING
      • BEARING 62/280 DU
      • BELT, POLY-V MOTOR DRIVE BC18
      • BLADE SET BC18
      • COUPLING ASSEM.
      • COVER,R.SIDE (HOLE)
      • GEARBOX , BC-18
      • HOUSING, BEARING SUPPORT
      • KEY
      • KNOB, CUTTER
      • NUT, M8
      • NUT,BLADE SUPPORT
      • RETAINING RING, EXTERNAL
      • RETAINING RING, INTERNAL
      • SCR,SOCHD M6-1.0x20mm
      • SCREW, M6 x 20
      • SCREW, M8 x 25mm
      • SCREW, M8 x 70mm
      • SEAL
      • SET SCREW
      • SET SCREW, M5 x 20mm
      • SET SCREW, M6 X 10MM
      • SHAFT, BLADE
      • SHAFT, IDLER BEARING
      • SPACER
      • SPACER,BLADE ASSEMBLY
      • SUPPORT, SHAFT (RIGHT)(62/28DU)
      • SUPPORT,BLADE
      • WASHER, M6
      • WASHER, M8
    • Cover Lock Assembly
      • COMB, BC-18
      • EXTENSION
      • HOUSING, LOCK SHAFT
      • KNOB, COVER LOCK , ALUMINUM
      • LABEL, OPEN/CLOSE
      • PIN, COMB
      • SCREW, M5 X 20MM
      • SCREW, SOCKET HD. M6 X 20MM
      • SET SCREW M6 X 20MM
      • SET SCREW, M5 X 8MM
      • SET SCREW, M6 X 10MM
      • SHAFT, SWITCH ACTUATING
      • SLEEVE
      • SNAP SWITCH
      • SPRING WASHER
      • SPRING, COMPRESSION
      • STUD, M12 X 30MM
      • SWITCH PLATE
      • T SHAFT, LOCK ASSEMBLY
    • Electrical Component Assembly
      • BRKT,TYTON TIE (ADH)
      • CLAMP, CORD (PLAST.)
      • CONTACTOR/STARTER 208-240/60/3PH. 1 HP M
      • CORD, INTERNAL SRM20 (p)
      • DIN RAIL BC18
      • ELECTRIC MOUNTING PLATE BC18
      • M5 FLT WASHER DIN125 ZINC PLT.
      • M5X25 SOC SET SCREW DIN916
      • NUT, M5-0.8 HEX DIN934 ZINC PLT.
      • POWER CORD, 115v (p)
      • POWER CORD, 220v (p)
      • SCR,SLOTTED FLT HD M3X8mm DIN963A
      • SCREW, PPHD ST .10-32X1/2
      • SCREW, SOCHD 10-32 x 1/2
      • Starter, 115V, 60HZ, 1PH
      • STRAIN RELIEF, (CE)(p)
      • STTR, 208-40/60/1 (9.5)(p)
      • STTR,1HP 1PH 9.5 (CE)(p)
      • STTR,1HP 3PH 2.5 (CE)(p)
      • TRANSFORMER, 440v (p)
      • TYTON TIES (p)
      • WASHER, FLAT #10 SAE
      • WASHER, LOCK #10
      • WIRE PKG, BC18
    • Main Housing
      • 1/4" FLAT WASHER
      • AXLE
      • BLADE COVER
      • BUSHING
      • COLLAR
      • CUTTING BOARD BC18
      • FOOT, Extension
      • LABEL, "DANGER"(SLICER)
      • LABEL, START/STOP BC18
      • LABEL, UNIVEX (p)
      • LABEL, US D.O.L.
      • LAMP 240V
      • LAMP, 120V
      • PIN, CUTTING BOARD MNTING BC18
      • SCREW, M6 x 20
      • SET SCREW
      • SPRING, COVER
      • SUCTION FOOT
      • SWITCH, START/STOP
    • Motor & Bowl Drive Assembly
      • 1/4" FLAT WASHER
      • BEARING
      • BEARING HOUSING, BOWL DRIVE
      • BELT, POLY-V MOTOR DRIVE BC18
      • BOWL, 18"
      • BRACKET, BOWL SWITCH
      • CAP
      • GEARBOX ASSY., BOWL DRIVE
      • KEY, GEARBOX INPUT
      • KEY, GEARBOX OUTPUT
      • MOTOR, 120V
      • NUT, KEP 1/4-20
      • NUT, KEP 5/16-18x5/16
      • NUT, M8
      • PIN, BOWL STOP
      • PLATE, MOTOR MOUNTING BC18
      • POST, ACTUATOR, BOWL
      • PULLEY, BOWL DRIVE
      • RETAINING RING, INTERNAL
      • SCREW M8 X 20MM
      • SCREW, HXHD 5/16-18x3/4
      • SCREW, M6 x 10mm
      • SET SCREW, M6 x 18mm
      • SHAFT, GEARBOX OUTPUT
      • SHAFT, PLUNGER
      • SNAP SWITCH
      • SPRING, COMPRESSION
      • SSCR,HX 1/4-20x1/4
      • Stud M8 X 90MM
      • Stud, M8 x 75MM
      • WASHER, BAYONET
      • WASHER, FLAT 5/16 SAE
      • WASHER, M8
      • WIRE I BOLT 1/4-20 X 1" ZNC. PLT. W/ NUT
    • PTO Assembly
      • 1/4" FLAT WASHER
      • BALL BEARING
      • BALL, STEEL 1/4"DIA.(p)
      • COUPLING- PTO ADAPTER
      • HSNG,PTO BC18
      • KEY
      • Lock Knob (thumb Screw)
      • PTO CAP
      • RETAINER, RING
      • RETAINING RING, EXTERNAL
      • SCREW, HD HXHD 1/4-20x3/4
      • SCREW, SFHD SS 6-32x3/8
      • SHAFT, PTO BC18
      • SPRING, 1/4OD;5/16 LONG (p)
      • WASHER, LOCK 1/4x1/2
      • WASHER, PTO S/S (p)
• Drive Unit Parts
  • ALMFC12 Drive Unit
    • ALMFC12 Assembly
      • FEED PAN
      • FIBER WASHER
      • Handwheel Ring
      • Housing, MFC12
      • LABEL,"AL MFC12"
      • LOCK PIN, MFC PLATE
      • PLATE 1/2"
      • PLATE 1/4"
      • PLATE 1/8"
      • PLATE 3/8"
      • PLATE, 3/16", CHOPPER
      • SHAFT, FRONT (p)
      • Stomper, Aluminum
      • STUD,DRIVE LOCK (p)
      • WORM ASSEMBLY
      • X-KNIFE #12
  • PM91 Drive Unit
    • Entire Assembly
      • 1/4" FLAT WASHER
      • BALL BEARING
      • BELT, DRIVE
      • BOLT, HHTB 1/4-20x1-1/2
      • BOLT,HEX 1/4-20x2
      • BUSHING, STRAIN RELIEF
      • CB,13 AMP (p)
      • CLIP,TUB (PREP MATE) (p)
      • CORD,ELECTRIC (p)
      • COUPLING- PTO ADAPTER
      • COVER GASKET (RUBBER)(p)
      • COVER,HOUSING MG,PM,VS (p)
      • FEET,PREP MATE (p)
      • FOOT, SUCTION TYPE
      • HOUSING, PTO
      • HSNG, MG/PM/VS (p)
      • KEY
      • KEY
      • LABEL,"DANGER/LUBRICATION"
      • LEG, PM91 (ALUM)(p)
      • Lock Knob (thumb Screw)
      • MOTOR ISOLATOR (p)
      • MOTOR, 120V
      • MOTOR, 1HP 220/50/1 (p)
      • NUT, HEX 10-32x1/8TH.
      • NUT, KEP 1/4-20
      • NUT,8MMx1.25 PITCH
      • PUL, DRIVEN (MG,PM)(p)
      • PULLEY, DRIVE (MG)(p)
      • RETAINER, RING
      • RETAINING RING, EXTERNAL
      • SCR,STHD 10-32 x 1/2 ZINC
      • SCREW, HD HXHD 1/4-20x3/4
      • SCREW, HXHD 1/4 X 20-1/2
      • SCREW, HXHD 5/16-18x3/4
      • SCREW, PPHD ST .10-32X1/2
      • SCREW, SOCHD 10-32x1 (HARD)
      • SHAFT, DRIVEN (LONG)(p)
      • SPRING,1"x1" (p)
      • SSCR,HX 1/4-20x1/4
      • SSCR,SOCHD 5/16-18x3/8
      • TOGGLE SWITCH, ON/OFF
      • TUB + COVER PREP MATE
      • TYTON TIES (p)
      • WASHER, LOCK #10
      • WASHER, LOCK 1/4x1/2
      • WASHER, LOCK 5/16x9/16
      • WSHR,FEND.9/32x31/32
• Fat Analyzer Parts
  • Fat Analyzer (FA73)
    • BSHG,RELIEF 90 DEG.
    • CALIBRATION ASSY.
    • Cartridge, Black
    • CB, 1 AMP (p)
    • CONTACT,ELEC. (BRASS)
    • CORD,ELEC. (FA-73)(p)
    • ELECTRODE, RIGHT
    • ELECTRODE- LEFT (HOLE)
    • FEET,RUBBER (FA-73)(p)
    • HANDLE,SS (FA-73)(p)
    • HEX NUT, PLTD. STEEL 8-32 X 1/8"
    • INSERT,CARTRIDGE (p)
    • INSULATOR,CONTACT (p)
    • LABEL, UNIVEX (p)
    • LABEL,CIRCUIT BRKR (p)
    • MEASURING DEVICE
    • ROD,SLIDE (CALIBRATOR) (p)
    • SCR,SPHD 6-32x1/4
    • SCR,SPHD 6-32x3/4
    • SCR,SPHD 8-32x2-1/4
    • SCREW,THUMB 8-32x3/8 (p)
    • SPACER, INSULATOR
    • SWITCH/PLATE ASSY,(FA-73)(p)
    • TRANSFORMER #5052,115/60 (p)
    • TRANSFORMER 220/50
    • Vial, Glass  (48 Pieces Per Package)
    • WASHER, LOCK #8
• Mixer Parts
  • M12 Mixer
    • Mixer M12 1977 and Earlier Models
      • Beater Head Assembly
        • BEARING
        • BEATER HEAD ASSY.
        • GEAR,B.H.PINION (M12)(p)
        • RETAINING RING, EXTERNAL
        • RETAINING RING, INTERNAL
        • RING, SPLASH (p)
        • SCREW, HXHD LH 3/8-24 X 1-1/4"
        • SHAFT,B.HEAD
        • SPACER, BEATER HEAD
      • Bowl Lift Control Assembly
        • BOWL LIFT HOUSING
        • HUB SPEED CONTROL
        • LEVER FOR SPEED CONTROL
        • NO LONGER AVAILABLE ONCE DEPLETED
        • PIN,ROLL 3/8x1-3/4 (p)
        • ROD END 3/8-24 LH
        • ROD, CONNECT (SC)
        • ROLL PIN (Bowl Lift)
        • WASHER, FLAT 5/16 SAE
        • Washer, Nylon (bowl Lift)
      • Bowl Support Assembly
        • COVER,MOVEABLE
        • FRAME, (M12B,M20) (p)
        • GASKET STRIP
        • GIBB, B.L.(M12,M20)(p)
        • NUT, HX 3/8-24x9/16x5/16
        • NUT, KEP 5/16-18x5/16
        • PIN, ROD END (SLIDE) (p)
        • RING, RET (5101-37)
        • SCREW, HXHD 5/16-18x1-3/4" PLTD
        • SCREW, HXHD 5/16-18x3/4
        • SLIDE, (M20) (p)
        • SUPPORT,BOWL M12B
        • WASHER, FLAT 5/16 SAE
        • WASHER, LOCK 5/16x9/16
      • Drive System
        • 1/4" FLAT WASHER
        • BELT
        • BELT (4L-340)
        • BUSHING, STRAIN RELIEF
        • CORD,ELEC.(M12+M20)
        • KNOB, TIMER
        • NUT, KEP 5/16-18x5/16
        • PUL,DRIVEN (AK74)(p)
        • SCREW, HX 5/16-24 x 3/8
        • TIMER REPLACEMENT KIT (p)
        • WASHER, FLAT 5/16 SAE
      • Housing Assembly
        • 1/4" FLAT WASHER
        • CAP, CRM 1/2" (SHIPPING)(p)
        • CAP,1-1/2 BASE (M12B)
        • COVER,SLIDE (FIXED)
        • NUT, HEX 10-32x1/8TH.
        • NUT, KEP 3/8-16
        • PANEL,REAR ACCESS
        • SCREW, PPHD ST .10-32X1/2
        • WASHER, FLAT 1/2 USS
        • WASHER, FLAT 5/16 SAE
      • Input Assembly
        • INPUT HOUSING
        • RETAINER, RING
        • RETAINING RING, EXTERNAL
        • WASHER, STRAP 1/4ID,1/8TH (p)
        • WOODRUFF KEY #9
      • Power Take-Of Assembly
        • 1/4" FLAT WASHER
        • RETAINER, RING
        • RETAINING RING, EXTERNAL
        • ROLL PIN 1/4 x 1-1/8
        • SPRING, 1/4OD;5/16 LONG (p)
        • SSCR, 3/8-16x2-1/2
      • Speed Control Assembly
        • 1/4" FLAT WASHER
        • COLLAR, CONT.ROD
        • Housing, Speed Control
        • LEVER, CONTROL
        • M12B S.C.CAM COMP.
        • NO LONGER AVAILABLE ONCE DEPLETED
        • NUT, HEX 10-32x1/8TH.
        • NUT, KEP 5/16-18x5/16
        • NYLON SPACER
        • PIN,ROLL 3/8x1-3/4 (p)
        • ROD END 3/8-24 LH
        • ROD,CONNECT.(SLIDE)(p)
        • SCREW, HX 5/16-24 x 3/8
        • Screw, SOCHD 10-32x3/4
        • WASHER, FLAT 5/16 SAE
        • WASHER, FLAT 5/8 SAE
        • Washer, Nylon (bowl Lift)
        • Washer, Spring B1250-040
      • Transmission
        • GEAR,INTERNAL M12 (p)
        • NUT, TIMMER.#C8118-1024-4
        • SCREW, HXHD 1/2-20x1
        • SCREW, PPHD ST .10-32X1/2
        • WASHER, FLAT 1/2 USS
        • WASHER, LOCK 1/2x7/8
      • Vari-speed Assembly
        • BASE, SWIVEL BRACKET (p)
        • NUT, HX 3/8-24x9/16x5/16
        • NUT, KEP 5/16-18x5/16
        • O-RING, RUBBER 4" DIA (p)
        • PIN, ROD END (SLIDE) (p)
        • PUL.V.S.(30TBR)(p)
        • PULLEY SWIVEL BRACKET
        • RETAINER, RING
        • RETAINING RING
        • RETAINING RING, EXTERNAL
        • RING, RET (5101-37)
        • ROD END RH 3/8-24 (p)
        • ROD,CONNECT.(SLIDE)(p)
        • SHAFT VARIABLE SPEED
        • WASHER, FLAT 5/16 SAE
        • Washer, Nylon (bowl Lift)
        • WOODRUFF KEY #9
      • Vertical Shaft Assembly
        • RETAINER, RING
    • Mixer M12 1978 to 1987 Models
      • Beater Head Assembly
        • BEARING
        • BEATER HEAD ASSY.
        • DRIVE PIN
        • GEAR,B.H.PINION (M12)(p)
        • HSNG,B.HEAD (M12B,C)(p)
        • RETAINING RING, EXTERNAL
        • RETAINING RING, INTERNAL
        • RING, SPLASH (p)
        • SCREW, HXHD LH 3/8-24 X 1-1/4"
        • SHAFT,B.HEAD
        • SPACER, BEATER HEAD
        • WASHER, FLAT 3/8 USS , ZINC PLATED
      • Bowl Lift Assembly
        • BOWL LIFT HOUSING
        • COLLAR, CONT.ROD
        • HUB SPEED CONTROL
        • LEVER FOR SPEED CONTROL
        • NO LONGER AVAILABLE ONCE DEPLETED
        • NUT, HX 3/8-24x9/16x5/16
        • NUT, KEP 5/16-18x5/16
        • NYLON SPACER
        • ROD END RH 3/8-24 (p)
        • ROD,CONNECT.(SLIDE)(p)
        • ROLL PIN (Bowl Lift)
        • WASHER, FLAT 5/16 SAE
        • Washer, Nylon (bowl Lift)
      • Bowl Support Assembly
        • COVER,MOVEABLE
        • FRAME, (M12B,M20) (p)
        • GASKET STRIP
        • GIBB, B.L.(M12,M20)(p)
        • NUT, KEP 5/16-18x5/16
        • PIN, ROD END (SLIDE) (p)
        • RING, RET (5101-37)
        • ROD END 3/8-24 LH
        • ROD,CONNECT.(SLIDE)(p)
        • SCREW, HXHD 5/16-18x1-3/4" PLTD
        • SCREW, HXHD 5/16-18x3/4
        • SLIDE, (M20) (p)
        • SUPPORT,BOWL M12B
        • WASHER, FLAT 5/16 SAE
        • WASHER, LOCK 5/16x9/16
      • Drive System
        • BELT
        • BELT (4L-340)
        • BUSHING, STRAIN RELIEF
        • CORD,ELEC.(M12+M20)
        • KNOB, TIMER
        • NUT, KEP 5/16-18x5/16
        • PUL,DRIVEN (AK74)(p)
        • SCREW, HX 5/16-24 x 3/8
        • TIMER REPLACEMENT KIT (p)
        • WASHER, FLAT 5/16 SAE
      • Housing Assembly
        • CAP, CRM 1/2" (SHIPPING)(p)
        • CAP,1-1/2 BASE (M12B)
        • COVER,SLIDE (FIXED)
        • NUT, HEX 10-32x1/8TH.
        • NUT, KEP 3/8-16
        • PANEL,REAR ACCESS
        • SCREW, PPHD ST .10-32X1/2
        • WASHER, FLAT #10 SAE
        • WASHER, FLAT 1/2 USS
        • WASHER, FLAT 5/16 SAE
      • Input Assembly
        • GEAR, INPUT PINION
        • INPUT HOUSING
        • KEY
        • RETAINER, RING
        • RETAINING RING, EXTERNAL
        • SHAFT,INPUT
        • WASHER, STRAP 1/4ID,1/8TH (p)
        • WOODRUFF KEY #9
      • Power Take-Of Assembly
        • 1/4" FLAT WASHER
        • BALL BEARING
        • BALL, STEEL 1/4"DIA.(p)
        • COUPLING- PTO ADAPTER
        • Gear, PTO Bevel (p)
        • GEAR, SPUR PTO
        • PTO CAP
        • PTO HOUSING
        • PTO KNOB ASSY
        • RETAINER, RING
        • RETAINING RING, EXTERNAL
        • ROLL PIN, 5/16 x 1-1/2"
        • SHAFT,PTO
        • SPRING, 1/4OD;5/16 LONG (p)
        • WOODRUFF KEY #9
      • Speed Control Assembly
        • COLLAR, CONT.ROD
        • Housing, Speed Control
        • HUB SPEED CONTROL
        • LEVER, CONTROL
        • M12B S.C.CAM COMP.
        • NO LONGER AVAILABLE ONCE DEPLETED
        • NUT, HX 3/8-24x9/16x5/16
        • NUT, KEP 5/16-18x5/16
        • NYLON SPACER
        • ROD END RH 3/8-24 (p)
        • ROD,CONNECT.(SLIDE)(p)
        • ROLL PIN (Bowl Lift)
        • Screw, SOCHD 10-32x3/4
        • WASHER, FLAT 5/16 SAE
        • Washer, Nylon (bowl Lift)
        • Washer, Spring B1250-040
      • Transmission
        • GEAR,INTERNAL M12 (p)
        • NUT, TIMMER.#C8118-1024-4
        • SCREW, HXHD 1/2-20x1
        • SCREW, PPHD ST .10-32X1/2
        • WASHER, FLAT 1/2 USS
        • WASHER, LOCK 1/2x7/8
      • Vari-speed Assembly
        • BASE, SWIVEL BRACKET (p)
        • NUT, KEP 5/16-18x5/16
        • O-RING, RUBBER 4" DIA (p)
        • PIN, ROD END (SLIDE) (p)
        • PUL.V.S.(30TBR)(p)
        • PULLEY SWIVEL BRACKET
        • RETAINER, RING
        • RETAINING RING
        • RETAINING RING, EXTERNAL
        • RING, RET (5101-37)
        • ROD END 3/8-24 LH
        • ROD,CONNECT.(SLIDE)(p)
        • SHAFT VARIABLE SPEED
        • WASHER, FLAT 3/8 USS , ZINC PLATED
        • WASHER, FLAT 5/16 SAE
        • WOODRUFF KEY #9
      • Vertical Shaft Assembly
        • BALL BEARING
        • Gear, Bevel (vertical) (p)
        • RETAINER, RING
        • ROLL PIN, 5/16 x 1-1/4"
        • VERTICAL SPACER (p)
        • WOODRUFF KEY #9
    • Mixer M12 1988 to 1989 Models
      • Beater Head Assembly
        • BEARING
        • BEATER HEAD ASSY.
        • DRIVE PIN
        • GEAR,B.H.PINION (M12)(p)
        • HSNG,B.HEAD (M12B,C)(p)
        • RETAINING RING, EXTERNAL
        • RETAINING RING, INTERNAL
        • RING, SPLASH (p)
        • SCREW, HXHD LH 3/8-24 X 1-1/4"
        • SHAFT,B.HEAD
        • SPACER, BEATER HEAD
        • WASHER, FLAT 3/8 USS , ZINC PLATED
        • WOODRUFF KEY #9
      • Drive System
        • BELT
        • BELT (4L-340)
        • BUSHING, STRAIN RELIEF
        • CORD,ELEC.(M12+M20)
        • KNOB, TIMER
        • NUT, KEP 5/16-18x5/16
        • PUL,DRIVEN (AK74)(p)
        • PULLEY,DRIVE  AS17 (1/2 BORE)(p)
        • SCREW, HX 5/16-24 x 3/8
        • TIMER REPLACEMENT KIT (p)
        • WASHER, FLAT 5/16 SAE
      • Housing Assembly
        • CAP, CRM 1/2" (SHIPPING)(p)
        • CAP,1-1/2 BASE (M12B)
        • COVER,SLIDE (FIXED)
        • GSKT,TOP COVER (OLDM20)
        • NUT, HEX 10-32x1/8TH.
        • NUT, KEP 3/8-16
        • NUT, TIMMER.#C8118-1024-4
        • PANEL,REAR ACCESS
        • SCREW, PPHD 8-32x3/8
        • SCREW, PPHD ST .10-32X1/2
        • SPRING, TOP COVER (p)
        • WASHER, FLAT #10 SAE
        • WASHER, FLAT #8
        • WASHER, FLAT 1/2 USS
        • WASHER, FLAT 5/16 SAE
        • WASHER, LOCK #8
      • Input Assembly
        • GEAR, INPUT PINION
        • INPUT HOUSING
        • KEY
        • RETAINER, RING
        • RETAINING RING, EXTERNAL
        • SHAFT,INPUT
        • WASHER, STRAP 1/4ID,1/8TH (p)
        • WOODRUFF KEY #9
      • Power Take Of Assembly
        • 1/4" FLAT WASHER
        • BALL BEARING
        • BALL, STEEL 1/4"DIA.(p)
        • COUPLING- PTO ADAPTER
        • Gear, PTO Bevel (p)
        • GEAR, SPUR PTO
        • PTO CAP
        • PTO HOUSING
        • PTO KNOB ASSY
        • RETAINER, RING
        • RETAINING RING, EXTERNAL
        • ROLL PIN, 5/16 x 1-1/2"
        • SHAFT,PTO
        • SPRING, 1/4OD;5/16 LONG (p)
        • WOODRUFF KEY #9
      • Speed Control Assembly
        • COLLAR, CONT.ROD
        • CONTROL KNOB FOR LEVER SPEED
        • Housing, Speed Control
        • HUB SPEED CONTROL
        • M12B S.C.CAM COMP.
        • NUT, HX 3/8-24x9/16x5/16
        • NUT, KEP 5/16-18x5/16
        • NYLON SPACER
        • ROD END RH 3/8-24 (p)
        • ROD, CONNECT (SC)
        • ROLL PIN (Bowl Lift)
        • Screw, SOCHD 10-32x3/4
        • WASHER, FLAT 5/16 SAE
        • Washer, Nylon (bowl Lift)
        • Washer, Spring B1250-040
      • Transmission
        • CLIP, SPRING (TRANS.CVR)(p)
        • GEAR,INTERNAL M12 (p)
        • SCREW, HXHD 1/2-20x1
        • SCREW, PPHD ST .10-32X1/2
        • WASHER, FLAT #10 SAE
        • WASHER, FLAT 1/2 USS
        • WASHER, LOCK #10
        • WASHER, LOCK 1/2x7/8
      • Vari-speed Assembly
        • BASE, SWIVEL BRACKET (p)
        • NUT, KEP 5/16-18x5/16
        • O-RING, RUBBER 4" DIA (p)
        • PIN, ROD END (SLIDE) (p)
        • PUL.V.S.(30TBR)(p)
        • PULLEY SWIVEL BRACKET
        • RETAINER, RING
        • RETAINING RING
        • RETAINING RING, EXTERNAL
        • RING, RET (5101-37)
        • ROD END 3/8-24 LH
        • ROD, CONNECT (SC)
        • SHAFT VARIABLE SPEED
        • WASHER, FLAT 3/8 USS , ZINC PLATED
        • WASHER, FLAT 5/16 SAE
        • WOODRUFF KEY #9
      • Vertical Shaft Assembly
        • BALL BEARING
        • Gear, Bevel (vertical) (p)
        • RETAINER, RING
        • ROLL PIN, 5/16 x 1-1/4"
        • VERTICAL SPACER (p)
        • WOODRUFF KEY #9
    • Mixer M12 1990 to1991 Models
      • Beater Head Assembly
        • BEARING
        • GEAR,B.H.PINION (M12)(p)
        • HSNG,B.HEAD (M12B,C)(p)
        • LABEL,"ROTATION"
        • PIN, DOWEL SS 1/4x1
        • RETAINING RING, EXTERNAL
        • RETAINING RING, INTERNAL
        • RING, SPLASH (p)
        • SCREW, HXHD LH 3/8-24 X 1-1/4"
        • SHAFT,B.HEAD
        • SPACER, BEATER HEAD
        • WASHER, SS B.HEAD
        • WOODRUFF KEY #9
      • Bowl Lift Assembly
        • BEARING, M12C (p)
        • CAM, B.LIFT (M12C)(p)
        • COLLAR, SHAFT (p)
        • LINK,CONN (M12C B.L.)(p)
        • NUT, HEX 10-32x1/8TH.
        • RING,RET EXT (5555-37)
        • SCR,SFHD 1/4-20x1
        • SCREW, HXHD 1/4 X 20-1/2
        • WASHER, LOCK #10
        • Washer, Nylon (bowl Lift)
      • Bowl Support Assembly
        • 1/4" FLAT WASHER
        • CAM PIN(2-7/8x.375)(p)
        • GIBB,BOWL LIFT (M12C)
        • PIN, BOWL SUPPORT (p)
        • PLATE, SLIDE (M12C
        • RING,RET EXT (5555-37)
        • SCREW HEX HEAD 5/16-18x1
        • SCREW, HXHD 1/4 X 20-1/2
        • SUPPORT, BOWL (M12C)
        • WASHER, LOCK 1/4x1/2
        • WASHER, LOCK 5/16x9/16
        • YOKE, B.LIFT (M12C)
      • Housing Assembly
        • CAP, CRM 1/2" (SHIPPING)(p)
        • CAP,1-1/2 BASE (M12B)
        • COVER,TOP (M12C)(p)
        • FOAM INSULATION
        • NUT, HEX 10-32x1/8TH.
        • NUT, TIMMER.#C8118-1024-4
        • PANEL,REAR ACCESS (p)
        • SCREW, PPHD #12, 1" LONG
        • SCREW, PPHD 8-32x3/8
        • SCREW, PPHD ST .10-32X1/2
        • SHIELD,SPLASH (M12C)
        • SPRING, TOP COVER (p)
        • WASHER, FLAT #10 SAE
        • WASHER, FLAT #8
        • WASHER, LOCK #8
      • Input Assembly
        • 1/4" FLAT WASHER
        • BEARING, M12C (p)
        • GEAR, INPUT PINION
        • KEY
        • NUT, KEP 1/4-20
        • RETAINER, RING
        • RETAINING RING, EXTERNAL
        • RETAINING RING, EXTERNAL
        • SHAFT,INPUT (M12C)(p)
        • WOODRUFF KEY #9
      • Power Take Of Assembly
        • BALL BEARING
        • BALL, STEEL 1/4"DIA.(p)
        • COUPLING- PTO ADAPTER
        • GEAR, PTO BEVEL (p)
        • GEAR, SPUR PTO
        • PTO CAP
        • PTO HOUSING
        • PTO KNOB ASSY
        • RETAINER, RING
        • RETAINING RING, EXTERNAL
        • ROLL PIN, 5/16 x 1-1/2"
        • SCREW, HD HXHD 1/4-20x1
        • SHAFT,PTO (M12C)(p)
        • SPRING, 1/4OD;5/16 LONG (p)
        • WASHER, LOCK 1/4x1/2
        • WOODRUFF KEY #9
      • Speed Control Assembly
        • CAM, Speed Control
        • CONTROL KNOB FOR LEVER SPEED
        • DENTENT DISC
        • Housing, Speed Control
        • HUB SPEED CONTROL
        • NUT, KEP 5/16-18x5/16
        • RING,RET EXT (5555-37)
        • ROD END 3/8-24 LH
        • ROD, CONNECTING (M12C)(p)
        • ROLL PIN (Bowl Lift)
        • SCREW, PPHD 1/4-20x1/2
        • SCREW, PPHD ST .10-32X1/2
        • Screw, SOCHD 10-32x3/4
        • SPRING, DET DISC
        • STRAP, DET.DISC SPRING (p)
        • WASHER, FLAT 5/16 SAE
        • WASHER, LOCK 1/4x1/2
        • Washer, Nylon (bowl Lift)
        • Washer, Spring B1250-040
      • Transmission
        • CLIP, SPRING (TRANS.CVR)(p)
        • FOAM INSULATION
        • GEAR,INTERNAL M12 (p)
        • PIN, DOWEL 1/4x1/2
        • SCREW, HXHD 1/2-20x1
        • SCREW, PPHD ST .10-32X1/2
        • WASHER, FLAT #10 SAE
        • WASHER, FLAT 1/2 USS
        • WASHER, LOCK #10
        • WASHER, LOCK 1/2x7/8
      • Vari-Speed And Drive System
        • AUTO ADJUST PULLY
        • BRKT, MOTOR MT (M12C)(p)
        • CLAMP, CORD (PLAST.)
        • CORD,ELEC.(M12+M20)
        • DRIVE BELT
        • GUARD,SWITCH (MIXER)
        • KNOB, TIMER
        • MTR,1/3 HP (p)
        • NUT, HEX 10-32x1/8TH.
        • NUT, HX 3/8-24x9/16x5/16
        • NUT, KEP 5/16-18x5/16
        • NUT,ELAS.STOP 3/8-16
        • PLATE,TIMER 15 MIN.
        • RAIL,MOTOR SLIDE (p)
        • RETAINER, BELT (UPPER)(p)
        • ROD END RH 3/8-24 (p)
        • SCR,S/S HXHD 3/8-16x1-1/2
        • SCR,SPHD 6-32x1/2
        • SCREW, HXHD 5/16-18x1-3/4" PLTD
        • STATIONARY PULLY
        • STRAP,MOTOR SLIDE (p)
        • TIMER REPLACEMENT KIT (p)
        • WASHER, FLAT #10 SAE
        • WASHER, LOCK #10
      • Vertical Shaft Assembly
        • BALL BEARING
        • GEAR, VERT. BEVEL (p)
        • KEY
        • RETAINER, RING
        • ROLL PIN, 5/16 x 1-1/4"
        • VERTICAL SPACER (p)
  • M20 Mixer
    • Mixer M20 1984 and Earlier Models
      • Beater Head Assembly
        • BALL BEARING
        • BEATER HEAD ASSY.(p)
        • BEATER HEAD GEAR
        • BEATER HEAD SHAFT
        • DRIVE PIN
        • HSNG,B.HEAD M20 (p)
        • RETAINER, RING
        • RETAINING RING, EXTERNAL
        • RING, SPLASH (p)
        • SCREW, HXHD LH 3/8-24 X 1-1/4"
        • SPACER,B.HEAD (p)
        • WASHER, FLAT 3/8 USS , ZINC PLATED
        • WOODRUFF KEY #9
      • Bowl Lift Assembly
        • Bowl Lift Cam Assy
        • BOWL LIFT HOUSING
        • COLLAR, B.L. LEVER (p)
        • COLLAR, CONT.ROD
        • NUT, HX 3/8-24x9/16x5/16
        • NUT, KEP 5/16-18x5/16
        • NYLON SPACER
        • ROD END RH 3/8-24 (p)
        • ROD, CONN.(M20 B.L.)(p)
        • WASHER, FLAT 5/16 SAE
        • Washer, Nylon (bowl Lift)
      • Bowl Support Assembly
        • COVER, MOVEABLE (p)
        • FRAME, (M12B,M20) (p)
        • GASKET STRIP
        • GIBB, B.L.(M12,M20)(p)
        • NUT, KEP 5/16-18x5/16
        • PIN, BOWL SUPPORT (p)
        • PIN, ROD END (SLIDE) (p)
        • RING, RET (5101-37)
        • ROD END 3/8-24 LH
        • ROD, CONN.(M20 B.L.)(p)
        • SCREW, HXHD 5/16-18x1-3/4" PLTD
        • SCREW, HXHD 5/16-18x3/4
        • SLIDE, (M20) (p)
        • SUPPORT, BOWL (M20)
        • WASHER, FLAT 5/16 SAE
        • WASHER, LOCK 5/16x9/16
      • Drive System (115V., 60HZ., 1PH.)
        • BRACKET, BELT RETAINER (p)
        • CORD,ELEC.(M12+M20)
        • GUARD,SWITCH (MIXER)
        • KEY
        • KNOB, TIMER
        • LARGE BELT Cogged
        • MOTOR, 1/2HP 115/60/1 (p)
        • NUT, KEP 5/16-18x5/16
        • PLATE,TIMER 15 MIN.
        • PULLEY, DRIVE AS17,5/8 (p)
        • RETAINER, BELT (UPPER)(p)
        • SCR,SFHD 6-32x3/8
        • SCR,SPHD 6-32x1/2
        • SCREW, HX 5/16-24 x 3/8
        • SCREW, HXHD 5/16-18x1-1/2
        • SMALL BELT Cogged
        • STATIONARY PULLY
        • SWITCH,BRYANT (p)
        • TIMER REPLACEMENT KIT (p)
        • WASHER, FLAT 5/16 SAE
      • Housing Assembly
        • BASE, MIXER
        • CAP, CRM 1/2" (SHIPPING)(p)
        • COVER , PLASTIC TAPERED
        • COVER,SLIDE (FIXED)
        • GSKT,TOP COVER (OLDM20)
        • NUT, HEX 10-32x1/8TH.
        • NUT, KEP 3/8-16
        • RUBBER FOOT
        • SCR,SFLH SS 10-32x3/8
        • SCREW, PPHD ST .10-32X1/2
        • WASHER, 1" 0O X 13/64" ID PLTD.
        • WASHER, FLAT #10 SAE
        • WASHER, FLAT 1/2 USS
        • WASHER, FLAT 5/16 SAE
      • Input Assembly
        • GEAR, INPUT PINION
        • INPUT ASSEM. SRM20
        • INPUT HOUSING
        • INPUT SHAFT
        • KEY
        • RETAINER, RING
        • RETAINING RING, EXTERNAL
        • WASHER, STRAP 1/4ID,1/8TH (p)
        • WOODRUFF KEY #9
      • Power Take Of Assembly
        • 1/4" FLAT WASHER
        • BALL BEARING
        • BALL, STEEL 1/4"DIA.(p)
        • COUPLING- PTO ADAPTER
        • Gear, PTO Bevel (p)
        • GEAR, SPUR PTO
        • PTO CAP
        • PTO HOUSING
        • PTO KNOB ASSY
        • RETAINER, RING
        • RETAINING RING, EXTERNAL
        • ROLL PIN, 5/16 x 1-1/2"
        • SHAFT, PTO (M20)(p)
        • SPRING, 1/4OD;5/16 LONG (p)
        • WOODRUFF KEY #9
      • Speed Control Assembly
        • CAM, SPEED CONTROL
        • COLLAR, CONT.ROD
        • DENTENT DISC
        • Housing, Speed Control
        • LEVER,M20 S.C.    NLA
        • NUT, HX 3/8-24x9/16x5/16
        • NUT, KEP 5/16-18x5/16
        • NYLON SPACER
        • ROD END RH 3/8-24 (p)
        • ROD, CONNECT (SC)
        • ROLL PIN (Bowl Lift)
        • SCREW, PPHD 1/4-20x1/2
        • SCREW, PPHD ST .10-32X1/2
        • Screw, SOCHD 10-32x3/4
        • SPRING, DET DISC
        • STRAP, DET.DISC SPRING (p)
        • WASHER, FLAT 5/16 SAE
        • WASHER, LOCK 1/4x1/2
        • Washer, Nylon (bowl Lift)
        • Washer, Spring B1250-040
      • Transmission
        • COVER, TRANS.
        • GEAR. INTERNAL
        • PIN, DOWEL 1/4x1/2
        • SCREW, HXHD 1/2-20x1
        • SCREW, PPHD 8-32x3/8
        • SCREW, PPHD ST .10-32X1/2
        • TRANS ASSY,SRM20
        • WASHER, FLAT #10 SAE
        • WASHER, FLAT 1/2 USS
        • WASHER, LOCK #10
        • WASHER, LOCK 1/2x7/8
      • Vari-speed Assembly
        • BALL BEARING
        • BASE, SWIVEL BRACKET (p)
        • NUT, KEP 5/16-18x5/16
        • O-RING, RUBBER 4" DIA (p)
        • PIN, ROD END (SLIDE) (p)
        • PULLEY SWIVEL BRACKET
        • Pulley, Vari-Speed
        • RETAINER, RING
        • RETAINING RING
        • RETAINING RING, EXTERNAL
        • RING, RET (5101-37)
        • ROD END 3/8-24 LH
        • ROD, CONNECT (SC)
        • SHAFT VARIABLE SPEED
        • WASHER, FLAT 3/8 USS , ZINC PLATED
        • WASHER, FLAT 5/16 SAE
        • WOODRUFF KEY #9
      • Vertical Shaft Assembly
        • BEARING, 5204ZZ
        • Gear, Bevel (vertical) (p)
        • RETAINER, RING
        • ROLL PIN, 5/16 x 1-1/4"
        • SPACER, VERT (M20)(p)
        • WOODRUFF KEY #9
    • Mixer M20 1985 to 1986 Models
      • Adjustable Slicer Plate Unit
        • BEARING THRUST
        • Knife Assembly
        • NUT, ADJUSTING
        • SPRING
      • Beater Head Assembly
        • BALL BEARING
        • BEATER HEAD GEAR
        • BEATER HEAD SHAFT
        • DRIVE PIN
        • HSNG,B.HEAD M20 (p)
        • M20 B.H.ASSY (OLD)(p)
        • RETAINER, RING
        • RETAINING RING, EXTERNAL
        • RING, SPLASH (p)
        • SCREW, HXHD LH 3/8-24 X 1-1/4"
        • SPACER,B.HEAD (p)
        • WOODRUFF KEY #9
      • Bowl Lift Assembly
        • Bowl Lift Cam Assy
        • BOWL LIFT HOUSING
        • CAM BOWL LIFT
        • COLLAR, CONT.ROD
        • CONTROL KNOB FOR LEVER SPEED
        • HUB SPEED CONTROL
        • LEVER, CONTROL
        • NUT, HX 3/8-24x9/16x5/16
        • NUT, KEP 5/16-18x5/16
        • NYLON SPACER
        • ROD END RH 3/8-24 (p)
        • ROD, CONNECT (SC)
        • ROLL PIN (Bowl Lift)
        • WASHER, FLAT 5/16 SAE
        • Washer, Nylon (bowl Lift)
      • Bowl Support Assembly
        • COVER, MOVEABLE (p)
        • FRAME, (M12B,M20) (p)
        • GASKET STRIP
        • GIBB, B.L.(M12,M20)(p)
        • NUT, KEP 5/16-18x5/16
        • PIN, ROD END (SLIDE) (p)
        • RING, RET (5101-37)
        • ROD END 3/8-24 LH
        • SCREW, HXHD 5/16-18x1-3/4" PLTD
        • SCREW, HXHD 5/16-18x3/4
        • SLIDE, (M20) (p)
        • SUPPORT, BOWL (M20)
        • WASHER, FLAT 5/16 SAE
        • WASHER, LOCK 5/16x9/16
      • Drive System (115V., 60HZ., 1PH.)
        • BRACKET, BELT RETAINER (p)
        • CORD,ELEC.(M12+M20)
        • GUARD,SWITCH (MIXER)
        • KEY
        • KNOB, TIMER
        • LARGE BELT Cogged
        • MOTOR, 1/2HP 115/60/1 (p)
        • NUT, KEP 5/16-18x5/16
        • PULLEY, DRIVE AS17,5/8 (p)
        • SCR,SFHD 6-32x3/8
        • SCR,SPHD 6-32x1/2
        • SCREW, HX 5/16-24 x 3/8
        • SCREW, HXHD 5/16-18x1-1/2
        • SLEEVE, BEARING REPLACEMENT ASSEM.
        • SMALL BELT Cogged
        • STATIONARY PULLY
        • SWITCH,BRYANT (p)
        • TIMER REPLACEMENT KIT (p)
        • WASHER, FLAT 3/8 USS , ZINC PLATED
        • WASHER, FLAT 5/16 SAE
      • Front And Back Case Unit
        • BUSHING,BRONZE (p)
        • Door Latch, VS9
        • HOUSING,FRONT(P)
        • HOUSING,REAR (VS9)(p)
        • HUB, REAR #12 (p)
        • PIN, PUSHER (LEFT)
        • PIN, PUSHER-- RIGHT
        • Pusher (feed) Plate with Handle
        • SHAFT LOCK PIN
      • Housing Assembly
        • BASE, MIXER
        • CAP, CRM 1/2" (SHIPPING)(p)
        • COVER , PLASTIC TAPERED
        • COVER, SLIDE (FIXED)
        • GSKT,TOP COVER (OLDM20)
        • NUT, HEX 10-32x1/8TH.
        • NUT, KEP 3/8-16
        • RUBBER FOOT
        • SCR,SFLH SS 10-32x3/8
        • SCREEN, M20 HOUSING (p)
        • SCREW, PPHD ST .10-32X1/2
        • WASHER, 1" 0O X 13/64" ID PLTD.
        • WASHER, FLAT #10 SAE
        • WASHER, FLAT 1/2 USS
        • WASHER, FLAT 5/16 SAE
      • Input Assembly
        • GEAR, INPUT PINION
        • INPUT ASSEM. SRM20
        • INPUT HOUSING
        • RETAINER, RING
        • RETAINING RING, EXTERNAL
        • SHAFT,INPUT
        • WASHER, STRAP 1/4ID,1/8TH (p)
        • WOODRUFF KEY #9
      • Julienne-Plate
        • THRUST BEARING
      • Power Take Off Assembly
        • 1/4" FLAT WASHER
        • BALL BEARING
        • BALL, STEEL 1/4"DIA.(p)
        • COUPLING- PTO ADAPTER
        • Gear, PTO Bevel (p)
        • GEAR, SPUR PTO
        • PTO CAP
        • PTO HOUSING
        • PTO KNOB ASSY
        • RETAINER, RING
        • RETAINING RING, EXTERNAL
        • ROLL PIN, 5/16 x 1-1/2"
        • SHAFT, PTO (M20)(p)
        • SPRING, 1/4OD;5/16 LONG (p)
        • WOODRUFF KEY #9
      • Shredder and Grater Plate Units(Vegetable Slicer and Plates)
        • 1/2" SHREDDER PLATE (000)
        • 5/16" SHREDDER PLATE (0)
        • GRATER PLATE (14)
        • HUB & SHAFT (PLATE HOLDER)
        • SHREDDER BLADE 3/16 INCH
        • SHREDDER PLATE (9) 3/32 INCH
        • THRUST BEARING
      • Speed Control Assembly
        • CAM, SPEED CONTROL
        • COLLAR, CONT.ROD
        • CONTROL KNOB FOR LEVER SPEED
        • DENTENT DISC
        • HUB SPEED CONTROL
        • LEVER, CONTROL
        • NUT, HX 3/8-24x9/16x5/16
        • NUT, KEP 5/16-18x5/16
        • NYLON SPACER
        • ROD END RH 3/8-24 (p)
        • ROD, CONNECT (SC)
        • ROLL PIN (Bowl Lift)
        • SCREW, PPHD 1/4-20x1/2
        • SCREW, PPHD ST .10-32X1/2
        • Screw, SOCHD 10-32x3/4
        • SPRING, DET DISC
        • STRAP, DET.DISC SPRING (p)
        • VARI SPEED ASSY (M30)(p)
        • WASHER, FLAT 5/16 SAE
        • Washer, Nylon (bowl Lift)
      • Transmission
        • GEAR. INTERNAL
        • NUT, TIMMER.#C8118-1024-4
        • SCREW, HXHD 1/2-20x1
        • SCREW, PPHD ST .10-32X1/2
        • WASHER, FLAT 1/2 USS
        • WASHER, LOCK 1/2x7/8
      • Vari-speed Assembly
        • BASE, SWIVEL BRACKET (p)
        • NUT, KEP 5/16-18x5/16
        • O-RING, RUBBER 4" DIA (p)
        • PIN, ROD END (SLIDE) (p)
        • PULLEY SWIVEL BRACKET
        • Pulley, Vari-Speed
        • RETAINER, RING
        • RETAINING RING
        • RETAINING RING, EXTERNAL
        • RING, RET (5101-37)
        • ROD END 3/8-24 LH
        • ROD, CONNECT (SC)
        • SHAFT VARIABLE SPEED
        • WASHER, FLAT 3/8 USS , ZINC PLATED
        • WASHER, FLAT 5/16 SAE
        • WOODRUFF KEY #9
      • Vertical Shaft Assembly
        • BEARING, 5204ZZ
        • Gear, Bevel (vertical) (p)
        • RETAINER, RING
        • ROLL PIN, 5/16 x 1-1/4"
        • SPACER, VERT (M20)(p)
        • WOODRUFF KEY #9
    • Mixer M20 1987 to 1989 Models
      • Beater Head Assembly
        • BALL BEARING
        • BEATER HEAD ASSY.(p)
        • BEATER HEAD GEAR
        • BEATER HEAD SHAFT
        • DRIVE PIN
        • HSNG,B.HEAD M20 (p)
        • RETAINER, RING
        • RETAINING RING, EXTERNAL
        • RING, SPLASH (p)
        • SCREW, HXHD LH 3/8-24 X 1-1/4"
        • SPACER,B.HEAD (p)
        • WASHER, FLAT 3/8 USS , ZINC PLATED
        • WOODRUFF KEY #9
      • Bowl Lift Assembly
        • Bowl Lift Cam Assy
        • BOWL LIFT HOUSING
        • COLLAR, CONT.ROD
        • NUT, HX 3/8-24x9/16x5/16
        • NUT, KEP 5/16-18x5/16
        • NYLON SPACER
        • ROD END RH 3/8-24 (p)
        • ROD, CONN.(M20 B.L.)(p)
        • WASHER, FLAT 5/16 SAE
        • Washer, Nylon (bowl Lift)
      • Bowl Support Assembly
        • COVER, MOVEABLE (p)
        • FRAME, (M12B,M20) (p)
        • GASKET STRIP
        • GIBB, B.L.(M12,M20)(p)
        • NUT, KEP 5/16-18x5/16
        • PIN, BOWL SUPPORT (p)
        • PIN, ROD END (SLIDE) (p)
        • RING, RET (5101-37)
        • ROD END 3/8-24 LH
        • ROD, CONN.(M20 B.L.)(p)
        • SCREW, HXHD 5/16-18x1-3/4" PLTD
        • SCREW, HXHD 5/16-18x3/4
        • SLIDE, (M20) (p)
        • SUPPORT, BOWL (M20)
        • WASHER, FLAT 5/16 SAE
        • WASHER, LOCK 5/16x9/16
      • Drive System (115V., 60HZ., 1PH.)
        • BRACKET, BELT RETAINER (p)
        • CORD,ELEC.(M12+M20)
        • GUARD,SWITCH (MIXER)
        • KEY
        • KNOB, TIMER
        • LARGE BELT Cogged
        • MOTOR, 1/2HP 115/60/1 (p)
        • NUT, KEP 5/16-18x5/16
        • PLATE,TIMER 15 MIN.
        • PULLEY, DRIVE AS17,5/8 (p)
        • RETAINER, BELT (UPPER)(p)
        • SCR,SFHD 6-32x3/8
        • SCR,SPHD 6-32x1/2
        • SCREW, HX 5/16-24 x 3/8
        • SCREW, HXHD 5/16-18x1-1/2
        • SMALL BELT Cogged
        • STATIONARY PULLY
        • SWITCH,BRYANT (p)
        • TIMER REPLACEMENT KIT (p)
        • WASHER, FLAT 5/16 SAE
      • Housing Assembly
        • BASE, MIXER
        • CAP, CRM 1/2" (SHIPPING)(p)
        • COVER , PLASTIC TAPERED
        • COVER, SLIDE (FIXED)
        • GSKT,TOP COVER (OLDM20)
        • NUT, HEX 10-32x1/8TH.
        • NUT, KEP 3/8-16
        • RUBBER FOOT
        • SCR,SFLH SS 10-32x3/8
        • SCREEN, M20 HOUSING (p)
        • SCREW, PPHD ST .10-32X1/2
        • WASHER, 1" 0O X 13/64" ID PLTD.
        • WASHER, FLAT 1/2 USS
        • WASHER, FLAT 5/16 SAE
      • Input Assembly
        • GEAR, INPUT PINION
        • INPUT ASSEM. SRM20
        • INPUT HOUSING
        • INPUT SHAFT
        • KEY
        • RETAINER, RING
        • RETAINING RING, EXTERNAL
        • WASHER, STRAP 1/4ID,1/8TH (p)
        • WOODRUFF KEY #9
      • Power Take Of Assembly
        • 1/4" FLAT WASHER
        • BALL BEARING
        • BALL, STEEL 1/4"DIA.(p)
        • COUPLING- PTO ADAPTER
        • Gear, PTO Bevel (p)
        • GEAR, SPUR PTO
        • PTO CAP
        • PTO HOUSING
        • PTO KNOB ASSY
        • RETAINER, RING
        • RETAINING RING, EXTERNAL
        • ROLL PIN, 5/16 x 1-1/2"
        • SHAFT, PTO (M20)(p)
        • SPRING, 1/4OD;5/16 LONG (p)
        • WOODRUFF KEY #9
      • Speed Control Assembly
        • CAM, SPEED CONTROL
        • COLLAR, CONT.ROD
        • DENTENT DISC
        • Housing, Speed Control
        • LEVER, CONTROL
        • NUT, HX 3/8-24x9/16x5/16
        • NUT, KEP 5/16-18x5/16
        • NYLON SPACER
        • ROD END RH 3/8-24 (p)
        • ROD, CONNECT (SC)
        • ROLL PIN (Bowl Lift)
        • SCREW, PPHD 1/4-20x1/2
        • SCREW, PPHD ST .10-32X1/2
        • Screw, SOCHD 10-32x3/4
        • SPRING, DET DISC
        • STRAP, DET.DISC SPRING (p)
        • WASHER, FLAT 5/16 SAE
        • WASHER, LOCK 1/4x1/2
        • Washer, Nylon (bowl Lift)
        • Washer, Spring B1250-040
      • Transmission
        • COVER, TRANS.
        • GEAR. INTERNAL
        • PIN, DOWEL 1/4x1/2
        • SCREW, HXHD 1/2-20x1
        • SCREW, PPHD 8-32x3/8
        • SCREW, PPHD ST .10-32X1/2
        • TRANS ASSY,SRM20
        • WASHER, FLAT #10 SAE
        • WASHER, FLAT 1/2 USS
        • WASHER, LOCK #10
        • WASHER, LOCK 1/2x7/8
      • Vari-speed Assembly
        • BASE, SWIVEL BRACKET (p)
        • NUT, KEP 5/16-18x5/16
        • O-RING, RUBBER 4" DIA (p)
        • PIN, ROD END (SLIDE) (p)
        • PULLEY SWIVEL BRACKET
        • Pulley, Vari-Speed
        • RETAINER, RING
        • RETAINING RING
        • RETAINING RING, EXTERNAL
        • RING, RET (5101-37)
        • ROD END 3/8-24 LH
        • ROD, CONNECT (SC)
        • SHAFT VARIABLE SPEED
        • WASHER, FLAT 3/8 USS , ZINC PLATED
        • WASHER, FLAT 5/16 SAE
        • WOODRUFF KEY #9
      • Vertical Shaft Assembly
        • BEARING, 5204ZZ
        • Gear, Bevel (vertical) (p)
        • RETAINER, RING
        • ROLL PIN, 5/16 x 1-1/4"
        • SPACER, VERT (M20)(p)
        • WOODRUFF KEY #9
  • M60 Mixer
    • Mixer M60 1989 and Earlier Models
      • Beaterhead And Vertical Shaft Assembly
        • BEARING, (6207LL)(p)
        • BEARING, 6207ZZ (p)
        • GEAR,B.HEAD PINION (p)
        • HSNG,B.HEAD M60 (p)
        • KEY,WDRF #15,1/4x1
        • NO LONGER AVAILABLE WHEN EXHAUSTED 4/07
        • PIN, DOWEL HD 1/2X2 (P)
        • PIN,SP.ROLL 1/2x2-1/2
        • RING,RET (5101-137)
        • RING,RET (N5002-281)
        • SCR,HXHD S/S LH (B.HEAD)(p)
        • SHAFT, BEATER HEAD   (P)
        • SHAFT,VERTICAL
        • SPACER, BEATER HEAD
        • SPACER,VERT.SHAFT
        • SSCR,SOCHD 5/16-18x1-3/4
        • WSHR,SHIM 1-3/8x2x1/32
      • Bowl Support Assembly
        • BOWL CLAMP, REAR
        • COVER,SLIDE (FIXED)
        • COVER,SLIDE (MOV.)
        • NUT, HEX 10-32x1/8TH.
        • NUT,FLEX LOCK 3/8-24
        • PIN, BOWL SUPPORT (p)
        • SCR,SCH 1/4-20x3/4
        • SUPPORT,BOWL
        • WASHER STAINLESS STEEL SPRING
        • WASHER, FLAT #10 SAE
      • Drive Assembly 1 PH. Motor (208-240V.,60HZ., 1PH.)
        • 1/4" FLAT WASHER
        • BEARING PILLOW BLOCK
        • BELT, DRIVE
        • Bolt, hxhd 3/8-16x2-1/2
        • BRKT,HOLD DOWN (1PH)
        • CHAIN,S.CONT. #35
        • ISOLATER, MOTOR (RUBBER)(p)
        • KEY
        • NUT, HEX 1/4-20
        • NUT, HX 3/8-24x9/16x5/16
        • NUT, KEP 5/16-18x5/16
        • PEDESTAL,MOTOR ( NO LONGER AVAILABLE AFT
        • PUL,V.S. DRIVEN
        • PUL,V.S.DR.(90MCW)(p)
        • RETAINER,CHAIN
        • ROLL PIN 1/4 x 1-1/8
        • SCR,S/S HXHD 3/8-16x1-1/2
        • SCR,SCH 1/4-20x3/4
        • SCREW, HD HXHD 1/4-20x1
        • SHAFT,CROSS (SC LOBE)
        • SPKT,S.CONT.(M60 LOWER)
        • SSCR,HX NYLTIP 5/16-18x2
        • WASHER, FLAT 3/8 USS , ZINC PLATED
        • WASHER, FLAT 5/16 SAE
        • WASHER, LOCK 1/4x1/2
      • Drive Assembly 3 PH. Motor (208-240V.,60HZ., 3PH.)
        • 1/4" FLAT WASHER
        • BEARING PILLOW BLOCK
        • BELT, DRIVE
        • Bolt, hxhd 3/8-16x2-1/2
        • CHAIN,S.CONT. #35
        • KEY
        • NUT, HEX 1/4-20
        • NUT, HX 3/8-24x9/16x5/16
        • PEDESTAL,MOTOR ( NO LONGER AVAILABLE AFT
        • PUL,V.S. DRIVEN
        • PUL,V.S.DR.(90MCW)(p)
        • RETAINER,CHAIN
        • ROLL PIN 1/4 x 1-1/8
        • SCR,SCH 1/4-20x3/4
        • SCREW, HD HXHD 1/4-20x1
        • SHAFT,CROSS (SC LOBE)
        • SPACER,MOTOR (3PH M60)
        • SPKT,S.CONT.(M60 LOWER)
        • WASHER, FLAT 3/8 USS , ZINC PLATED
        • WASHER, LOCK 1/4x1/2
      • Gearbox Housing
        • 1/4" FLAT WASHER
        • COVER,TRANS. (FRONT)
        • COVER,TRANS. (REAR)
        • GEAR, INTERNAL (p)
        • NUT, HEX 1/4-20
        • PLUG,FREEZE (p)
        • RING,SPLASH (p)
        • SCR,SCH 1/4-20x1/2
        • SCREW, HXHD 1/2-20x1
        • SCREW, PPHD 1/4-20x1/2
        • SCREW, PPHD 8-32x3/8
        • WASHER, LOCK 1/2x7/8
      • P.T.O. Assembly
        • BEARING (6205LL)
        • COUPLING- PTO ADAPTER
        • GEAR,PTO BEVEL (p)
        • GEAR,PTO SPUR.....NO LONGER AVAILABLE 8/
        • HSNG,PTO M60
        • PIN,ROLL 3/8x1-3/4 (p)
        • PTO CAP
        • PTO KNOB ASSY
        • RETAINING RING
        • RETAINING RING INERNAL
        • SCREW HEX HEAD 5/16-18x1
        • SEAL,OIL (PTO)(p)
        • SHAFT, P.T.O.
        • WASHER, LOCK 5/16x9/16
        • WOODRUFF KEY #9
      • Speed Control Assembly
        • 1/4" FLAT WASHER
        • BSHG,THRUST
        • CONTROL KNOB FOR LEVER SPEED
        • HSNG,SPEED CONTROL
        • HUB SPEED CONTROL
        • KEY
        • LEVER FOR SPEED CONTROL
        • NUT, KEP 5/16-18x5/16
        • RETAINER,CHAIN
        • ROLL PIN (Bowl Lift)
        • S.C.CAM-BLOCK ASSEMBLY
        • SCREW, HD HXHD 1/4-20x3/4
        • SCREW, PPHD 1/4-20x1/2
        • SCREW, PPHD ST .10-32X1/2
        • Screw, SOCHD 10-32x3/4
        • SPRING, DET DISC
        • STRAP, DET.DISC SPRING (p)
        • WASHER, FLAT 5/16 SAE
        • WASHER, LOCK 1/4x1/2
        • WASHER, PTO S/S (p)
        • Washer, Spring B1250-040
      • Three Phase Controls - 208-240V,-60HZ,-3PH
        • BRKT,3PH STARTER MOUNT
        • COVER, DUST (GREEN)(p)
        • DUST COVER (RED)
        • KNOB, TIMER
        • PLATE,TIMER 15 MIN.
        • Starter, (contactor) 208-240V  3 Phase
        • SWITCH,START (M60)
        • SWITCH,STOP (M60)
        • TIMER REPLACEMENT KIT (p)
  • SRM12 Food Mixer
    • Food Mixer SRM12 (Year 1996) Model
      • Beater Head Assembly
        • BEARING
        • GEAR,B.H.PINION (M12)(p)
        • HSNG,B.HEAD (M12B,C)(p)
        • LABEL,"ROTATION"
        • PIN, DOWEL SS 1/4x1
        • RETAINING RING, EXTERNAL
        • RETAINING RING, INTERNAL
        • RING, SPLASH (p)
        • SCREW, HXHD LH 3/8-24 X 1-1/4"
        • SET SCREW, 3/8-16 X 1-1/4
        • SHAFT,B.HEAD
        • SPACER, BEATER HEAD
        • WASHER, SS B.HEAD
        • WOODRUFF KEY #9
      • Bowl Lift Assembly
        • BEARING, M12C (p)
        • CAM, B.LIFT (M12C)(p)
        • COLLAR, B.L. LEVER
        • COLLAR, SHAFT (p)
        • LINK,CONN (M12C B.L.)(p)
        • NUT, HEX 10-32x1/8TH.
        • PIN, ROLL 3/16 x 1
        • RING,RET EXT (5555-37)
        • SCR,SFHD 1/4-20x1
        • WASHER, LOCK #10
        • Washer, Nylon (bowl Lift)
      • Bowl Support Assembly
        • 1/4" FLAT WASHER
        • CAM PIN(2-7/8x.375)(p)
        • GASKET, STRIP THIN BLACK (p)
        • GIBB, BOWL LIFT (p)
        • PIN, BOWL SUPPORT (p)
        • RING,RET EXT (5555-37)
        • SCREW, HXHD 1/4 X 20-1/2
        • SCREW, HXHD 5/16-18x3/4
        • SUPPORT,BOWL (96) (p)
        • WASHER, LOCK 1/4x1/2
        • WASHER, LOCK 5/16x9/16
        • YOKE, BOWL LIFT
      • Housing Assembly
        • BOWL LIFT SAFETY SWITCH
        • BRACKET BOWL SWITCH
        • BRKT, GUARD SWITCH
        • CAP, CRM 1/2" (SHIPPING)(p)
        • CAP,1-1/2 BASE (M12B)
        • CONTACTOR, 240/60;220/50 (p)
        • COVER,SLIDE (FIXED)
        • COVER,TOP (M12C)(p)
        • DECAL START/STOP
        • FOAM INSULATION
        • INSULATOR, SWITCH
        • KNOB, TIMER
        • LABEL, START/STOP/TIMER (p)
        • MOUNT, CONT/STARTER (p)
        • NUT, ELASTIC STOP 4-40
        • NUT, HEX 10-32x1/8TH.
        • NUT, KEP 5/16-18x5/16
        • NUT, TIMMER.#C8118-1024-4
        • PANEL,REAR ACCESS (p)
        • PIN, DOWEL 1/4x1/2
        • PUSH BUTTON, START
        • PUSH BUTTON, STOP
        • RAIL, BOWL LIFT (p)
        • SCREEN,SRM12 (p)
        • SCREW, CHHD M4-.7x6mm
        • SCREW, HXHD 4-40 x 3/4
        • SCREW, PPHD #12, 1" LONG
        • SCREW, PPHD 8-32x3/8
        • SCREW, PPHD ST .10-32X1/2
        • SPRING, TOP COVER (p)
        • STARTER, CSA 115/60,9.5 (p)
        • STTR,1/3HP 4.0 (CE) (P)
        • TIMER, 15 MINUTE
        • WASHER, FLAT #10 SAE
        • WASHER, FLAT #8
        • WASHER, FLAT 5/16 SAE
        • WASHER, LOCK #8
      • Input Assembly
        • 1/4" FLAT WASHER
        • BALL BEARING
        • BEARING, M12C (p)
        • GEAR, INPUT PINION
        • KEY
        • NUT, KEP 1/4-20
        • RETAINER, RING
        • RETAINING RING, EXTERNAL
        • RETAINING RING, EXTERNAL
        • SHAFT,INPUT (M12C)(p)
        • WOODRUFF KEY #9
      • Power Take off Assembly
        • 1/4" FLAT WASHER
        • BALL BEARING
        • BALL, STEEL 1/4"DIA.(p)
        • COUPLING- PTO ADAPTER
        • DEFLECTOR, LUBRICATION (p)
        • GEAR, PTO BEVEL (p)
        • GEAR, SPUR PTO
        • HOUSING, PTO BEARING (p)
        • PTO CAP
        • PTO HOUSING
        • PTO KNOB ASSY
        • RETAINER, RING
        • RETAINING RING, EXTERNAL
        • ROLL PIN, 5/16 x 1-1/2"
        • SCREW, HD HXHD 1/4-20x1
        • SCREW, SFHD SS 6-32x3/8
        • SHAFT,BEVEL GEAR (p)
        • SHAFT,PTO (M12C)(p)
        • SPRING, 1/4OD;5/16 LONG (p)
        • WASHER, LOCK 1/4x1/2
        • WASHER, PTO S/S (p)
        • WOODRUFF KEY #9
      • Speed Control Assembly
        • CAM, Speed Control
        • CONTROL KNOB FOR LEVER SPEED
        • DENTENT DISC
        • Housing, Speed Control
        • HUB SPEED CONTROL
        • NUT, KEP 5/16-18x5/16
        • RING,RET EXT (5555-37)
        • ROD END 3/8-24 LH
        • ROD, CONNECTING (M12C)(p)
        • ROLL PIN (Bowl Lift)
        • SCREW, PPHD 1/4-20x1/2
        • SCREW, PPHD ST .10-32X1/2
        • Screw, SOCHD 10-32x3/4
        • SPRING, DET DISC
        • STRAP, DET.DISC SPRING (p)
        • WASHER, FLAT 5/16 SAE
        • WASHER, LOCK 1/4x1/2
        • Washer, Nylon (bowl Lift)
        • Washer, Spring B1250-040
      • Transmission
        • CLIP, SPRING (TRANS.CVR)(p)
        • FOAM INSULATION
        • GEAR,INTERNAL M12 (p)
        • LABEL, UNIVEX (p)
        • PIN, DOWEL 1/4x1/2
        • SCREW, HXHD 1/2-20x1
        • SCREW, PPHD ST .10-32X1/2
        • WASHER, FLAT #10 SAE
        • WASHER, FLAT 1/2 USS
        • WASHER, LOCK #10
        • WASHER, LOCK 1/2x7/8
      • Vari-Speed and Drive System
        • AUTO ADJUST PULLY
        • BRKT, MOTOR MT (M12C)(p)
        • CLAMP, CORD (PLAST.)
        • CORD,INTERNAL SRM12 (p)
        • DRIVE BELT
        • MOTOR, 1/3HP (GP)(p)
        • NUT, HEX 10-32x1/8TH.
        • NUT, HX 3/8-24x9/16x5/16
        • NUT, KEP 5/16-18x5/16
        • NUT,ELAS.STOP 3/8-16
        • POWER CORD, 115v (p)
        • POWER CORD, 220v (p)
        • RAIL,MOTOR SLIDE (p)
        • RETAINER, BELT (UPPER)(p)
        • ROD END RH 3/8-24 (p)
        • SCR,S/S HXHD 3/8-16x1-1/2
        • SCREW, HXHD 5/16-18x3/4
        • STATIONARY PULLY
        • STRAIN RELIEF, (CE)(p)
        • STRAP,MOTOR SLIDE (p)
        • WASHER, FLAT
        • WASHER, FLAT #10 SAE
        • WASHER, LOCK #10
      • Vertical Shaft Assembly
        • BALL BEARING
        • GEAR, VERT. BEVEL (p)
        • KEY
        • RETAINER, RING
        • ROLL PIN, 5/16 x 1-1/4"
        • VERTICAL SPACER (p)
    • Food Mixer SRM12 (Year 2000) Model
      • Beater Head Assembly
        • BEARING
        • GEAR,B.H.PINION (M12)(p)
        • HSNG,B.HEAD (M12B,C)(p)
        • LABEL,"ROTATION"
        • PIN, DOWEL SS 1/4x1
        • RETAINING RING, EXTERNAL
        • RETAINING RING, INTERNAL
        • RING, SPLASH (p)
        • SCREW, HXHD LH 3/8-24 X 1-1/4"
        • SET SCREW, 3/8-16 X 1-1/4
        • SHAFT,B.HEAD
        • SPACER, BEATER HEAD
        • WASHER, B.HEAD (M20)
        • WOODRUFF KEY #9
      • Bowl Lift Assembly
        • BEARING, M12C (p)
        • CAM, B.LIFT (M12C)(p)
        • COLLAR, B.L. LEVER (p)
        • COLLAR, SHAFT (p)
        • LEVER, BOWL LIFT (p)
        • LINK,CONN (M12C B.L.)(p)
        • NUT, HEX 10-32x1/8TH.
        • RING,RET EXT (5555-37)
        • SCR,SFHD 1/4-20x1
        • WASHER, FLAT #10 SAE
        • WASHER, LOCK #10
        • Washer, Nylon (bowl Lift)
      • Bowl Support Assembly
        • 1/4" FLAT WASHER
        • CAM PIN(2-7/8x.375)(p)
        • COVER,SLIDE (MOVEABLE)(p)
        • GASKET, STRIP THIN BLACK (p)
        • GIBB, BOWL LIFT (p)
        • PIN, BOWL SUPPORT (p)
        • RING,RET EXT (5555-37)
        • SCREW, HXHD 1/4 X 20-1/2
        • SCREW, HXHD 5/16-18x3/4
        • SUPPORT,BOWL (96) (p)
        • WASHER, LOCK 1/4x1/2
        • WASHER, LOCK 5/16x9/16
        • YOKE,BOWL LIFT (96)(p)
      • Housing Assembly
        • BOLT, CARR.SS 1/4-20x3/4
        • BOWL LIFT SAFETY SWITCH
        • BRACKET BOWL SWITCH
        • BRACKET, LOWER (SAFETY RING)(p)
        • BRACKET, UPPER (SAFETY RING)(p)
        • CONTACTOR  120V
        • Contactor, 110/50,60/1 (JPN)
        • CONTACTOR, 240/60;220/50 (p)
        • COVER,SLIDE (FIXED)(98)(p)
        • COVER,TOP (M12C)(p)
        • DECAL START/STOP
        • FOAM INSULATION
        • HSNG,SRM12
        • INSULATOR, SWITCH
        • KNOB, TIMER
        • LABEL, START/STOP/TIMER (p)
        • MOUNT, CONT/STARTER (p)
        • NUT, ELASTIC STOP 4-40
        • NUT, HEX 10-32x1/8TH.
        • NUT, KEP 1/4-20
        • NUT, KEP 5/16-18x5/16
        • NUT, TIMMER.#C8118-1024-4
        • PANEL,REAR ACCESS (p)
        • PIN, DOWEL 1/4x1/2
        • PUSH BUTTON, START
        • PUSH BUTTON, STOP
        • RAIL, BOWL LIFT (p)
        • Safety Guard Switch
        • SCREEN,SRM12 (p)
        • SCREW, #12 SPANNER (p)
        • SCREW, 10-32 x 1/2 SPANNER
        • SCREW, CHHD M4-.7x6mm
        • SCREW, HXHD 4-40 x 3/4
        • SCREW, PPHD #12, 1" LONG
        • SCREW, PPHD 8-32x3/8
        • SCREW, PPHD ST .10-32X1/2
        • SLEEVE, LEG (WIP)
        • SPRING, TOP COVER (p)
        • STARTER, CSA 115/60,9.5 (p)
        • STTR, 460/60, 380/50
        • STTR,1/3HP 4.0 (CE) (P)
        • TIMER, 15 MINUTE
        • TOOL KIT, SECURITY (SP6.14)(p)
        • TRANSFORMER, 440v (p)
        • WASHER, FLAT
        • WASHER, FLAT #10 SAE
        • WASHER, FLAT #8
        • WASHER, LOCK #10
        • WASHER, LOCK #8
        • WASHER, STRAP 1/4ID,1/8TH (p)
      • Input Assembly
        • 1/4" FLAT WASHER
        • BALL BEARING
        • BEARING
        • BEARING, M12C (p)
        • GEAR, INPUT PINION
        • KEY
        • NUT, KEP 1/4-20
        • RETAINER, RING
        • RETAINING RING, EXTERNAL
        • RETAINING RING, EXTERNAL
        • SCREW, HD HXHD 1/4-20x3/4
        • SHAFT,INPUT (M12C)(p)
        • WOODRUFF KEY #9
      • Power Take off Assembly
        • 1/4" FLAT WASHER
        • BALL BEARING
        • BALL, STEEL 1/4"DIA.(p)
        • COUPLING- PTO ADAPTER
        • DEFLECTOR, LUBRICATION (p)
        • GEAR, PTO BEVEL (p)
        • GEAR, SPUR PTO
        • HOUSING, PTO (WRAP) (p)
        • HOUSING, PTO BEARING (WRAP)(p)
        • PTO CAP
        • PTO KNOB ASSY
        • RETAINER, RING
        • RETAINING RING, EXTERNAL
        • ROLL PIN, 5/16 x 1-1/4"
        • SCREW, HD HXHD 1/4-20x1
        • SCREW, HD HXHD 1/4-20x3/4
        • SCREW, SFHD SS 6-32x3/8
        • SHAFT,BEVEL GEAR (p)
        • SHAFT,PTO (M12C)(p)
        • SPRING, 1/4OD;5/16 LONG (p)
        • WASHER, LOCK 1/4x1/2
        • WASHER, PTO S/S (p)
        • WOODRUFF KEY #9
      • Speed Control Assembly
        • CAM, Speed Control
        • CONTROL KNOB FOR LEVER SPEED
        • DENTENT DISC
        • Housing, Speed Control
        • HUB SPEED CONTROL
        • LEVER, CONTROL
        • NUT, KEP 5/16-18x5/16
        • RING,RET EXT (5555-37)
        • ROD END 3/8-24 LH
        • ROD, CONNECTING (M12C)(p)
        • ROLL PIN (Bowl Lift)
        • SCREW, PPHD 1/4-20x1/2
        • SCREW, PPHD ST .10-32X1/2
        • Screw, SOCHD 10-32x3/4
        • SPRING, DET DISC
        • STRAP, DET.DISC SPRING (p)
        • WASHER, FLAT
        • WASHER, LOCK 1/4x1/2
        • Washer, Nylon (bowl Lift)
        • Washer, Spring B1250-040
      • Transmission
        • CLIP, SPRING (TRANS.CVR)(p)
        • FOAM INSULATION
        • GEAR,INTERNAL M12 (p)
        • HOUSING, PTO BEARING (p)
        • HSNG,SRM12 TRANS. (MAGNET)(p)
        • LABEL, "SRM12"
        • MAGNET, SAFETY GUARD (p)
        • PIN, DOWEL 1/4x1/2
        • SCREW, HXHD 1/2-20x1
        • SCREW, PPHD ST .10-32X1/2
        • SCREW, SOCHD 10-32x1 (HARD)
        • WASHER, FLAT #10 SAE
        • WASHER, FLAT 1/2 USS
        • WASHER, LOCK #10
        • WASHER, LOCK 1/2x7/8
      • Vari-Speed and Drive System
        • AUTO ADJUST PULLY
        • BRKT, MOTOR MT (M12C)(p)
        • CLAMP, CORD (PLAST.)
        • CORD, ELECTRIC 3PH (CE)
        • CORD, EXTERNAL (UK)
        • CORD, INTERNAL 3PH.
        • CORD, POWER (EUR)
        • CORD,INTERNAL SRM12 (p)
        • DRIVE BELT
        • MOTOR, 1/3HP (GP)(p)
        • MTR,1/3 HP (p)
        • NUT, HEX 10-32x1/8TH.
        • NUT, HX 3/8-24x9/16x5/16
        • NUT, KEP 3/8-16
        • NUT, KEP 5/16-18x5/16
        • POWER CORD, 115v (p)
        • POWER CORD, 220v (p)
        • RAIL,MOTOR SLIDE (p)
        • RETAINER, BELT (UPPER)(p)
        • ROD END RH 3/8-24 (p)
        • SCR,S/S HXHD 3/8-16x1-1/2
        • SCREW, HXHD 5/16-18x3/4
        • STATIONARY PULLY
        • STRAIN RELIEF, (CE)(p)
        • STRAP,MOTOR SLIDE (p)
        • WASHER, FLAT
        • WASHER, FLAT #10 SAE
        • WASHER, LOCK #10
      • Vertical Shaft Assembly
        • BALL BEARING
        • GEAR, VERT. BEVEL (p)
        • RETAINER, RING
        • ROLL PIN, 5/16 x 1-1/2"
        • Vertical Shaft
        • VERTICAL SPACER (p)
        • WOODRUFF KEY #9
    • Food Mixer SRM12 1993 and Earlier Models
      • Beater Head Assembly
        • BEARING
        • GEAR,B.H.PINION (M12)(p)
        • HSNG,B.HEAD (M12B,C)(p)
        • LABEL,"ROTATION"
        • RETAINING RING, EXTERNAL
        • RETAINING RING, INTERNAL
        • RING, SPLASH (p)
        • SCREW, HXHD LH 3/8-24 X 1-1/4"
        • SHAFT,B.HEAD
        • SPACER, BEATER HEAD
        • WASHER, SS B.HEAD
        • WOODRUFF KEY #9
      • Bowl Lift Assembly
        • BEARING, M12C (p)
        • CAM, B.LIFT (M12C)(p)
        • COLLAR, SHAFT (p)
        • LINK,CONN (M12C B.L.)(p)
        • NUT, HEX 10-32x1/8TH.
        • RING,RET EXT (5555-37)
        • SCR,SFHD 1/4-20x1
        • SCREW, HXHD 1/4 X 20-1/2
        • WASHER, LOCK #10
        • Washer, Nylon (bowl Lift)
      • Bowl Support Assembly
        • 1/4" FLAT WASHER
        • CAM PIN(2-7/8x.375)(p)
        • GIBB,BOWL LIFT (M12C)
        • PIN, BOWL SUPPORT (p)
        • PLATE, SLIDE (M12C
        • RING,RET EXT (5555-37)
        • SCREW HEX HEAD 5/16-18x1
        • SCREW, HXHD 1/4 X 20-1/2
        • SUPPORT, BOWL (M12C)
        • WASHER, LOCK 1/4x1/2
        • WASHER, LOCK 5/16x9/16
        • YOKE, B.LIFT (M12C)
      • Housing Assembly
        • BRKT, GUARD SWITCH
        • CAP, CRM 1/2" (SHIPPING)(p)
        • CAP,1-1/2 BASE (M12B)
        • CONTACTOR  120V
        • CONTACTOR, 240/60;220/50 (p)
        • COVER,TOP (M12C)(p)
        • DECAL START/STOP
        • FOAM INSULATION
        • LABEL, START/STOP/TIMER (p)
        • MOUNT, CONT/STARTER (p)
        • NUT, ELASTIC STOP 4-40
        • NUT, HEX 10-32x1/8TH.
        • NUT, KEP 5/16-18x5/16
        • NUT, TIMMER.#C8118-1024-4
        • PANEL,REAR ACCESS (p)
        • SCREW, CHHD M4-.7x6mm
        • SCREW, HXHD 4-40 x 3/4
        • SCREW, PPHD #12, 1" LONG
        • SCREW, PPHD 8-32x3/8
        • SCREW, PPHD ST .10-32X1/2
        • SHIELD,SPLASH (M12C)
        • SPRING, TOP COVER (p)
        • STARTER, CSA 115/60,9.5 (p)
        • TIMER, 15 MINUTE
        • WASHER, FLAT #10 SAE
        • WASHER, FLAT #8
        • WASHER, FLAT 5/16 SAE
        • WASHER, LOCK #8
      • Input Assembly
        • 1/4" FLAT WASHER
        • BEARING, M12C (p)
        • GEAR, INPUT PINION
        • KEY
        • NUT, KEP 1/4-20
        • RETAINER, RING
        • RETAINING RING, EXTERNAL
        • RETAINING RING, EXTERNAL
        • SHAFT,INPUT (M12C)(p)
        • WOODRUFF KEY #9
      • Power Take off Assembly
        • BALL BEARING
        • BALL, STEEL 1/4"DIA.(p)
        • COUPLING- PTO ADAPTER
        • GEAR, PTO BEVEL (p)
        • GEAR, SPUR PTO
        • PTO CAP
        • PTO HOUSING
        • PTO KNOB ASSY
        • RETAINER, RING
        • RETAINING RING, EXTERNAL
        • ROLL PIN, 5/16 x 1-1/2"
        • SCREW, HD HXHD 1/4-20x1
        • SHAFT,PTO (M12C)(p)
        • SPRING, 1/4OD;5/16 LONG (p)
        • WASHER, LOCK 1/4x1/2
        • WOODRUFF KEY #9
      • Speed Control Assembly
        • CAM, Speed Control
        • CONTROL KNOB FOR LEVER SPEED
        • Housing, Speed Control
        • HUB SPEED CONTROL
        • NUT, KEP 5/16-18x5/16
        • RING,RET EXT (5555-37)
        • ROD END 3/8-24 LH
        • ROD, CONNECTING (M12C)(p)
        • ROLL PIN (Bowl Lift)
        • SCREW, PPHD 1/4-20x1/2
        • SCREW, PPHD ST .10-32X1/2
        • Screw, SOCHD 10-32x3/4
        • SPRING, DET DISC
        • STRAP, DET.DISC SPRING (p)
        • WASHER, FLAT 5/16 SAE
        • WASHER, LOCK 1/4x1/2
        • Washer, Nylon (bowl Lift)
        • Washer, Spring B1250-040
      • Transmission
        • CLIP, SPRING (TRANS.CVR)(p)
        • FOAM INSULATION
        • GEAR,INTERNAL M12 (p)
        • PIN, DOWEL 1/4x1/2
        • SCREW, HXHD 1/2-20x1
        • SCREW, PPHD ST .10-32X1/2
        • WASHER, FLAT #10 SAE
        • WASHER, FLAT 1/2 USS
        • WASHER, LOCK #10
        • WASHER, LOCK 1/2x7/8
      • Vari-Speed and Drive System
        • AUTO ADJUST PULLY
        • BRKT, MOTOR MT (M12C)(p)
        • CLAMP, CORD (PLAST.)
        • CORD,ELEC.(M12+M20)
        • CORD,INTERNAL SRM12 (p)
        • DRIVE BELT
        • MTR,1/3 HP (p)
        • NUT, HEX 10-32x1/8TH.
        • NUT, HX 3/8-24x9/16x5/16
        • NUT, KEP 5/16-18x5/16
        • NUT,ELAS.STOP 3/8-16
        • POWER CORD, 115v (p)
        • POWER CORD, 220v (p)
        • RAIL,MOTOR SLIDE (p)
        • RETAINER, BELT (UPPER)(p)
        • ROD END RH 3/8-24 (p)
        • SCR,S/S HXHD 3/8-16x1-1/2
        • SCREW, HXHD 5/16-18x3/4
        • STATIONARY PULLY
        • STRAP,MOTOR SLIDE (p)
        • WASHER, FLAT #10 SAE
        • WASHER, LOCK #10
      • Vertical Shaft Assembly
        • BALL BEARING
        • GEAR, VERT. BEVEL (p)
        • KEY
        • RETAINER, RING
        • ROLL PIN, 5/16 x 1-1/4"
        • VERTICAL SPACER (p)
  • SRM20 Food Mixer
    • Food Mixer SRM20 (Year 1993) Model
      • Beater Head Assembly
        • BALL BEARING
        • BEATER HEAD ASSY.(p)
        • BEATER HEAD GEAR
        • BEATER HEAD SHAFT
        • HSNG,B.HEAD M20 (p)
        • LABEL,"ROTATION"
        • PIN, DRIVE 1/4 X 1
        • RETAINER, RING
        • RETAINING RING, EXTERNAL
        • RING, SPLASH (p)
        • SCREW, HXHD LH 3/8-24 X 1-1/4"
        • SPACER,B.HEAD (p)
        • WASHER, SS B.HEAD
        • WOODRUFF KEY #9
        • WSHR,NYFL7/8x1-5/8x1/32
      • Bowl Lift Assembly
        • Bowl Lift Cam Assy
        • BOWL LIFT HOUSING
        • COLLAR, CONT.ROD
        • NUT, HX 3/8-24x9/16x5/16
        • NUT, KEP 5/16-18x5/16
        • NYLON SPACER
        • PIN, ROLL 3/16 x 1
        • ROD END RH 3/8-24 (p)
        • ROD, CONN.(M20 B.L.)(p)
        • SCREW, SOCHD 10-32-1/4
        • WASHER, FLAT 5/16 SAE
        • Washer, Nylon (bowl Lift)
      • Bowl Support Assembly
        • COVER, MOVEABLE (p)
        • FRAME, (M12B,M20) (p)
        • GASKET, STRIP THIN BLACK (p)
        • GIBB, B.L.(M12,M20)(p)
        • NUT, KEP 5/16-18x5/16
        • PIN, BOWL SUPPORT (p)
        • PIN, ROD END (SLIDE) (p)
        • RING, RET (5101-37)
        • ROD END 3/8-24 LH
        • ROD, CONN.(M20 B.L.)(p)
        • SCREW, HXHD 5/16-18x1-1/2
        • SCREW, HXHD 5/16-18x3/4
        • SLIDE, (M20) (p)
        • SUPPORT, BOWL (M20)
        • WASHER, FLAT
        • WASHER, LOCK 5/16x9/16
      • Housing Assembly
        • BASE, MIXER
        • BRACKET, BOWL SWITCH (p)
        • BRACKET, LEFT GUARD SWITCH
        • CAP, CRM 1/2" (SHIPPING)(p)
        • CONTACTOR  120V
        • CONTACTOR, 240/50 (p)
        • CONTACTOR, 240/60;220/50 (p)
        • COVER, HOUSING (p)
        • COVER, SLIDE (FIXED)
        • DECAL START/STOP
        • FOAM INSULATION
        • HOUSING, SRM20 MIXER
        • KNOB, TIMER
        • LABEL, START/STOP/TIMER (p)
        • MOUNT, CONT/STARTER (p)
        • NUT, ELASTIC STOP 4-40
        • NUT, HEX 10-32x1/8TH.
        • NUT, KEP 3/8-16
        • NUT, TIMMER.#C8118-1024-4
        • PANEL, REAR ACCESS (p)
        • RUBBER FOOT
        • SCREEN, M20 HOUSING (p)
        • SCREW, CHHD M4-.7x6mm
        • SCREW, HXHD 4-40 x 3/4
        • SCREW, PPHD #12, 1" LONG
        • SCREW, PPHD 8-32x3/8
        • SCREW, PPHD ST .10-32X1/2
        • SPRING, TOP COVER (p)
        • STARTER, CSA 115/60,9.5 (p)
        • TIMER, 15 MINUTE
        • WASHER, FLAT #10 SAE
        • WASHER, FLAT #8
        • WASHER, FLAT 5/16 SAE
        • WASHER, FLAT 5/8 SAE
        • WASHER, LOCK #10
        • WASHER, LOCK #8
      • Input Assembly
        • BALL BEARING
        • GEAR, INPUT PINION
        • INPUT ASSEM. SRM20
        • INPUT HOUSING
        • INPUT SHAFT
        • KEY
        • RETAINER, RING
        • RETAINING RING, EXTERNAL
        • SCREW, HD HXHD 1/4-20x1
        • WASHER, STRAP 1/4ID,1/8TH (p)
        • WOODRUFF KEY #9
      • Power Take off Assembly
        • BALL BEARING
        • BALL, STEEL 1/4"DIA.(p)
        • COUPLING- PTO ADAPTER
        • Gear, PTO Bevel (p)
        • GEAR, SPUR PTO
        • PTO CAP
        • PTO HOUSING
        • PTO KNOB ASSY
        • RETAINER, RING
        • RETAINING RING, EXTERNAL
        • ROLL PIN, 5/16 x 1-1/2"
        • SCREW, HD HXHD 1/4-20x1
        • SHAFT, PTO (M20)(p)
        • SPRING, 1/4OD;5/16 LONG (p)
        • WASHER, LOCK 1/4x1/2
        • WOODRUFF KEY #9
      • Speed Control Assembly
        • CAM, SPEED CONTROL
        • COLLAR, CONT.ROD
        • CONTROL KNOB FOR LEVER SPEED
        • DENTENT DISC
        • Housing, Speed Control
        • HUB SPEED CONTROL
        • NUT, HX 3/8-24x9/16x5/16
        • NUT, KEP 5/16-18x5/16
        • NYLON SPACER
        • ROD END RH 3/8-24 (p)
        • ROD, CONNECT (SC)
        • ROLL PIN (Bowl Lift)
        • SCREW, PPHD 1/4-20x1/2
        • SCREW, PPHD ST .10-32X1/2
        • Screw, SOCHD 10-32x3/4
        • SPRING, DET DISC
        • STRAP, DET.DISC SPRING (p)
        • WASHER, FLAT 5/16 SAE
        • WASHER, LOCK 1/4x1/2
        • Washer, Nylon (bowl Lift)
        • Washer, Spring B1250-040
      • Transmission
        • CLIP, SPRING (TRANS.CVR)(p)
        • COVER, TRANS. (NEW)
        • GEAR. INTERNAL
        • PIN, DOWEL 1/4x1/2
        • SCREW, HXHD 1/2-20x1
        • WASHER, FLAT #10 SAE
        • WASHER, FLAT 1/2 USS
        • WASHER, LOCK #10
        • WASHER, LOCK 1/2x7/8
      • Vari-Speed Assembly
        • BALL BEARING
        • BASE, SWIVEL BRACKET (p)
        • BRACKET, BELT RETAINER (p)
        • BUSHING, STRAIN RELIEF
        • CLAMP, CORD (PLAST.)
        • KEY
        • LARGE BELT Cogged
        • MOTOR, 1/2 220/50/1 (p)
        • MOTOR, 1/2HP 115/60/1 (p)
        • NUT, HEX 10-32x1/8TH.
        • NUT, KEP 5/16-18x5/16
        • O-RING, RUBBER 4" DIA (p)
        • PIN, ROD END (SLIDE) (p)
        • POWER CORD, 115v (p)
        • POWER CORD, 220v (p)
        • PULLEY SWIVEL BRACKET
        • PULLEY, DRIVE AS17,5/8 (p)
        • Pulley, Vari-Speed
        • RETAINER, BELT (UPPER)(p)
        • RETAINER, RING
        • RETAINING RING
        • RETAINING RING, EXTERNAL
        • RING, RET (5101-37)
        • ROD END 3/8-24 LH
        • ROD, CONNECT (SC)
        • SCREW, HXHD 5/16-18x1-1/2
        • SHAFT VARIABLE SPEED
        • SLEEVE, BEARING REPLACEMENT ASSEM.
        • SMALL BELT Cogged
        • STATIONARY PULLY
        • WASHER, FLAT
        • WASHER, FLAT #10 SAE
        • WASHER, FLAT 3/8 USS , ZINC PLATED
        • WASHER, FLAT 5/16 SAE
        • WASHER, LOCK #10
        • WIRE PKG., SRM20 (p)
        • WOODRUFF KEY #9
      • Vertical Shaft Assembly
        • BALL BEARING
        • BEARING, 5204ZZ
        • Gear, Bevel (vertical) (p)
        • RETAINER, RING
        • ROLL PIN, 5/16 x 1-1/4"
        • SPACER, VERT (M20)(p)
        • WOODRUFF KEY #9
    • Food Mixer SRM20 (Year 1994) Model
      • Beater Head Assembly
        • BALL BEARING
        • BEATER HEAD ASSY.(p)
        • BEATER HEAD GEAR
        • BEATER HEAD SHAFT
        • HSNG,B.HEAD M20 (p)
        • LABEL,"ROTATION"
        • PIN, DRIVE 1/4 X 1
        • RETAINER, RING
        • RETAINING RING, EXTERNAL
        • RING, SPLASH (p)
        • SCREW, HXHD LH 3/8-24 X 1-1/4"
        • SET SCREW, 3/8-16 X 1-1/4
        • SPACER,B.HEAD (p)
        • WASHER, SS B.HEAD
        • WOODRUFF KEY #9
      • Bowl Lift Assembly
        • Bowl Lift Cam Assy
        • BOWL LIFT HOUSING
        • COLLAR, B.L. LEVER
        • COLLAR, CONT.ROD
        • NUT, HX 3/8-24x9/16x5/16
        • NUT, KEP 5/16-18x5/16
        • NUT, LOCK 5/16-24
        • NYLON SPACER
        • PIN, ROLL 3/16 x 1
        • ROD END RH 3/8-24 (p)
        • ROD, CONN.(M20 B.L.)(p)
        • SSCR,OVPT 5/16-24x1-1/8
        • WASHER, FLAT 5/16 SAE
        • Washer, Nylon (bowl Lift)
      • Bowl Support Assembly
        • COVER, MOVEABLE (p)
        • FRAME, (M12B,M20) (p)
        • GASKET, STRIP THIN BLACK (p)
        • GIBB, B.L.(M12,M20)(p)
        • NUT, KEP 5/16-18x5/16
        • PIN, BOWL SUPPORT (p)
        • PIN, ROD END (SLIDE) (p)
        • RING, RET (5101-37)
        • ROD END 3/8-24 LH
        • ROD, CONN.(M20 B.L.)(p)
        • SCREW, HXHD 5/16-18x1-1/2
        • SCREW, HXHD 5/16-18x3/4
        • SLIDE, (M20) (p)
        • SUPPORT, BOWL (M20)
        • WASHER, FLAT
        • WASHER, LOCK 5/16x9/16
      • Housing Assembly
        • BASE, MIXER
        • BOWL LIFT SAFETY SWITCH
        • BRACKET, BOWL SWITCH (p)
        • BRACKET, LEFT GUARD SWITCH
        • CAP, CRM 1/2" (SHIPPING)(p)
        • CONTACTOR  120V
        • CONTACTOR, 240/50 (p)
        • CONTACTOR, 240/60;220/50 (p)
        • COVER, HOUSING (p)
        • COVER, SLIDE (FIXED)
        • DECAL START/STOP
        • FOAM INSULATION
        • HOUSING, SRM20 MIXER
        • KNOB, TIMER
        • LABEL, START/STOP/TIMER (p)
        • MOUNT, CONT/STARTER (p)
        • NUT, ELASTIC STOP 4-40
        • NUT, HEX 10-32x1/8TH.
        • NUT, KEP 3/8-16
        • NUT, TIMMER.#C8118-1024-4
        • PANEL, REAR ACCESS (p)
        • PUSH BUTTON, STOP
        • RUBBER FOOT
        • SCREEN, M20 HOUSING (p)
        • SCREW, CHHD M4-.7x6mm
        • SCREW, HXHD 4-40 x 3/4
        • SCREW, PPHD #12, 1" LONG
        • SCREW, PPHD 8-32x3/8
        • SCREW, PPHD ST .10-32X1/2
        • SPRING, TOP COVER (p)
        • STARTER, CSA 115/60,9.5 (p)
        • TIMER, 15 MINUTE
        • WASHER, FLAT #10 SAE
        • WASHER, FLAT #8
        • WASHER, FLAT 5/16 SAE
        • WASHER, FLAT 5/8 SAE
        • WASHER, LOCK #10
        • WASHER, LOCK #8
      • Input Assembly
        • BALL BEARING
        • GEAR, INPUT PINION
        • INPUT ASSEM. SRM20
        • INPUT HOUSING
        • INPUT SHAFT
        • KEY
        • RETAINER, RING
        • RETAINING RING, EXTERNAL
        • SCREW, HD HXHD 1/4-20x1
        • WASHER, STRAP 1/4ID,1/8TH (p)
        • WOODRUFF KEY #9
      • Power Take off Assembly
        • 1/4" FLAT WASHER
        • BALL BEARING
        • BALL, STEEL 1/4"DIA.(p)
        • COUPLING- PTO ADAPTER
        • DEFLECTOR, LUBRICATION (p)
        • Gear, PTO Bevel (p)
        • GEAR, SPUR PTO
        • PTO CAP
        • PTO HOUSING
        • PTO KNOB ASSY
        • RETAINER, RING
        • RETAINING RING, EXTERNAL
        • ROLL PIN, 5/16 x 1-1/2"
        • SCREW, HD HXHD 1/4-20x1
        • SHAFT, PTO (M20)(p)
        • SPRING, 1/4OD;5/16 LONG (p)
        • WASHER, LOCK 1/4x1/2
        • WOODRUFF KEY #9
      • Speed Control Assembly
        • CAM, SPEED CONTROL
        • COLLAR, CONT.ROD
        • CONTROL KNOB FOR LEVER SPEED
        • DENTENT DISC
        • Housing, Speed Control
        • HUB SPEED CONTROL
        • NUT, HX 3/8-24x9/16x5/16
        • NUT, KEP 5/16-18x5/16
        • NYLON SPACER
        • ROD END RH 3/8-24 (p)
        • ROD, CONNECT (SC)
        • ROLL PIN (Bowl Lift)
        • SCREW, PPHD 1/4-20x1/2
        • SCREW, PPHD ST .10-32X1/2
        • Screw, SOCHD 10-32x3/4
        • SPRING, DET DISC
        • STRAP, DET.DISC SPRING (p)
        • WASHER, FLAT 5/16 SAE
        • WASHER, LOCK 1/4x1/2
        • Washer, Nylon (bowl Lift)
        • Washer, Spring B1250-040
      • Transmission
        • CLIP, SPRING (TRANS.CVR)(p)
        • COVER, TRANS. (NEW)
        • FOAM INSULATION
        • GEAR. INTERNAL
        • LABEL, UNIVEX (p)
        • PIN, DOWEL 1/4x1/2
        • SCREW, HXHD 1/2-20x1
        • WASHER, FLAT #10 SAE
        • WASHER, FLAT 1/2 USS
        • WASHER, LOCK #10
        • WASHER, LOCK 1/2x7/8
      • Vari-Speed Assembly
        • BALL BEARING
        • BASE, SWIVEL BRACKET (p)
        • BRACKET, BELT RETAINER (p)
        • BUSHING, STRAIN RELIEF
        • CLAMP, CORD (PLAST.)
        • CORD, INTERNAL SRM20 (p)
        • KEY
        • LARGE BELT Cogged
        • MOTOR, 1/2 220/50/1 (p)
        • MOTOR, 1/2HP 115/60/1 (p)
        • NUT, HEX 10-32x1/8TH.
        • NUT, KEP 5/16-18x5/16
        • O-RING, RUBBER 4" DIA (p)
        • PIN, ROD END (SLIDE) (p)
        • POWER CORD, 115v (p)
        • POWER CORD, 220v (p)
        • PULLEY SWIVEL BRACKET
        • PULLEY, DRIVE AS17,5/8 (p)
        • Pulley, Vari-Speed
        • RETAINER, BELT (UPPER)(p)
        • RETAINER, RING
        • RETAINING RING
        • RETAINING RING, EXTERNAL
        • RING, RET (5101-37)
        • ROD END 3/8-24 LH
        • ROD, CONNECT (SC)
        • SCREW, HX 5/16-24 x 3/8
        • SCREW, HXHD 5/16-18x1-1/2
        • SHAFT VARIABLE SPEED
        • SLEEVE, BEARING REPLACEMENT ASSEM.
        • SMALL BELT Cogged
        • STATIONARY PULLY
        • WASHER, FLAT
        • WASHER, FLAT #10 SAE
        • WASHER, FLAT 3/8 USS , ZINC PLATED
        • WASHER, FLAT 5/16 SAE
        • WASHER, LOCK #10
        • WOODRUFF KEY #9
      • Vertical Shaft Assembly
        • BALL BEARING
        • BEARING, 5204ZZ
        • Gear, Bevel (vertical) (p)
        • KEY
        • RETAINER, RING
        • ROLL PIN, 5/16 x 1-1/4"
        • SPACER, VERT (M20)(p)
    • Food Mixer SRM20 (Year 1998) Model
      • Beater Head Assembly
        • BALL BEARING
        • BEATER HEAD ASSY.(p)
        • BEATER HEAD GEAR
        • BEATER HEAD SHAFT
        • HSNG,B.HEAD M20 (p)
        • LABEL,"ROTATION"
        • PIN, DRIVE 1/4 X 1
        • RETAINER, RING
        • RETAINING RING, EXTERNAL
        • RING, SPLASH (p)
        • SCREW, HXHD LH 3/8-24 X 1-1/4"
        • SET SCREW, 3/8-16 X 1-1/4
        • SPACER,B.HEAD (p)
        • WASHER, B.HEAD (M20)
        • WOODRUFF KEY #9
      • Bowl Lift Assembly
        • Bowl Lift Cam Assy
        • BOWL LIFT HOUSING
        • COLLAR, B.L. LEVER
        • COLLAR, CONT.ROD
        • NUT, HX 3/8-24x9/16x5/16
        • NUT, KEP 5/16-18x5/16
        • NUT, LOCK 5/16-24
        • NYLON SPACER
        • PIN, ROLL 3/16 x 1
        • ROD END RH 3/8-24 (p)
        • ROD, CONN.(M20 B.L.)(p)
        • SSCR,OVPT 5/16-24x1-1/8
        • WASHER, FLAT
        • Washer, Nylon (bowl Lift)
      • Bowl Support Assembly
        • COVER, MOVEABLE (p)
        • FRAME, (M12B,M20) (p)
        • GASKET, STRIP THIN BLACK (p)
        • GIBB, B.L.(M12,M20)(p)
        • NUT, KEP 5/16-18x5/16
        • PIN, BOWL SUPPORT (p)
        • PIN, ROD END (SLIDE) (p)
        • RING, RET (5101-37)
        • ROD END 3/8-24 LH
        • ROD, CONN.(M20 B.L.)(p)
        • SCREW, HXHD 5/16-18x1-1/2
        • SCREW, HXHD 5/16-18x3/4
        • SLIDE, (M20) (p)
        • SUPPORT, BOWL (M20)
        • WASHER, FLAT
        • WASHER, LOCK 5/16x9/16
      • Housing Assembly
        • BASE, MIXER
        • BOLT, CARR.SS 1/4-20x3/4
        • BOWL LIFT SAFETY SWITCH
        • BRACKET, BOWL SWITCH (p)
        • BRACKET, LOWER (SAFETY RING)(p)
        • BRACKET, UPPER (SAFETY RING)(p)
        • BUSHING, PLAS. 3/4x1-1/8 (p)
        • CAP, CRM 1/2" (SHIPPING)(p)
        • CONTACTOR  120V
        • Contactor, 110/50,60/1 (JPN)
        • CONTACTOR, 240/50 (p)
        • CONTACTOR, 240/60;220/50 (p)
        • COVER, HOUSING (p)
        • COVER,SLIDE (FIXED)(98)(p)
        • DECAL START/STOP
        • DRIVE SCREW
        • FOAM INSULATION
        • HOUSING, SRM20 (98)
        • INSULATOR, SWITCH
        • KNOB, TIMER
        • LABEL, START/STOP/TIMER (p)
        • MOUNT, CONT/STARTER (p)
        • NUT, ELASTIC STOP 4-40
        • NUT, HEX 1/4-20
        • NUT, HEX 10-32x1/8TH.
        • NUT, KEP 1/4-20
        • NUT, KEP 3/8-16
        • NUT, TIMMER.#C8118-1024-4
        • PANEL, REAR ACCESS (p)
        • PUSH BUTTON, START
        • PUSH BUTTON, STOP
        • RUBBER FOOT
        • Safety Guard Switch
        • SCREEN, M20 HOUSING (p)
        • SCREW, #12 SPANNER (p)
        • SCREW, 10-32 x 1/2 SPANNER
        • SCREW, CHHD M4-.7x6mm
        • SCREW, HD HXHD 1/4-20x1
        • SCREW, HXHD 4-40 x 3/4
        • SCREW, PPHD #12, 1" LONG
        • SCREW, PPHD 8-32x3/8
        • SCREW, PPHD ST .10-32X1/2
        • SPEED CONTROL LABEL
        • SPRING, TOP COVER (p)
        • STARTER, 1/2HP 6.0 (CE) (P)
        • STARTER, 380/50/3  1.6
        • STARTER, CSA 115/60,9.5 (p)
        • TIMER, 15 MINUTE
        • TOOL KIT, SECURITY (SP6.14)(p)
        • WASHER, FLAT #10 SAE
        • WASHER, FLAT #8
        • WASHER, FLAT 1/2 USS
        • WASHER, FLAT 3/8 USS , ZINC PLATED
        • WASHER, LOCK #10
        • WASHER, LOCK #8
        • WASHER, LOCK 1/4x1/2
        • WASHER, STRAP 1/4ID,1/8TH (p)
      • Input Assembly
        • BALL BEARING
        • GEAR, INPUT PINION
        • INPUT ASSEM. SRM20
        • INPUT HOUSING
        • INPUT SHAFT
        • KEY
        • RETAINER, RING
        • RETAINING RING, EXTERNAL
        • SCREW, HD HXHD 1/4-20x1
        • WASHER, LOCK 1/4x1/2
        • WASHER, STRAP 1/4ID,1/8TH (p)
        • WOODRUFF KEY #9
      • Power Take off Assembly
        • 1/4" FLAT WASHER
        • BALL BEARING
        • BALL, STEEL 1/4"DIA.(p)
        • COUPLING- PTO ADAPTER
        • DEFLECTOR, LUBRICATION (p)
        • Gear, PTO Bevel (p)
        • GEAR, SPUR PTO
        • HOUSING, PTO BEARING (p)
        • PTO CAP
        • PTO HOUSING
        • PTO KNOB ASSY
        • RETAINER, RING
        • RETAINING RING, EXTERNAL
        • ROLL PIN, 5/16 x 1-1/4"
        • SCREW, HD HXHD 1/4-20x3/4
        • SCREW, SFHD SS 6-32x3/8
        • SHAFT, BEVEL GEAR (p)
        • SHAFT, PTO (M20)(p)
        • SPRING, 1/4OD;5/16 LONG (p)
        • WASHER, LOCK 1/4x1/2
        • WASHER, PTO S/S (p)
        • WOODRUFF KEY #9
      • Speed Control Assembly
        • CAM, SPEED CONTROL
        • COLLAR, CONT.ROD
        • CONTROL KNOB FOR LEVER SPEED
        • DENTENT DISC
        • Housing, Speed Control
        • HUB SPEED CONTROL
        • LEVER, CONTROL
        • NUT, HX 3/8-24x9/16x5/16
        • NUT, KEP 5/16-18x5/16
        • NYLON SPACER
        • ROD END RH 3/8-24 (p)
        • ROD, CONNECT (SC)
        • ROLL PIN (Bowl Lift)
        • SCREW, PPHD 1/4-20x1/2
        • SCREW, PPHD ST .10-32X1/2
        • Screw, SOCHD 10-32x3/4
        • SPRING, DET DISC
        • STRAP, DET.DISC SPRING (p)
        • WASHER, FLAT
        • WASHER, LOCK 1/4x1/2
        • Washer, Nylon (bowl Lift)
        • Washer, Spring B1250-040
      • Transmission
        • CLIP, SPRING (TRANS.CVR)(p)
        • COVER, TRANS. (NEW)
        • FOAM INSULATION
        • GEAR. INTERNAL
        • HOLDER, MAGNET (p)
        • HOUSING, TRANS.(MAGNET)(p)
        • LABEL, "SRM20"
        • MAGNET, SAFETY GUARD (p)
        • PIN, DOWEL 1/4x1/2
        • SCREW, HXHD 1/2-20x1
        • SCREW, PPHD ST .10-32X1/2
        • SCREW, SOCHD 10-32x1 (HARD)
        • WASHER, FLAT #10 SAE
        • WASHER, FLAT 1/2 USS
        • WASHER, LOCK #10
        • WASHER, LOCK 1/2x7/8
      • Vari-Speed Assembly
        • BALL BEARING
        • BASE, SWIVEL BRACKET (p)
        • BRACKET, BELT RETAINER (p)
        • CLAMP, CORD (PLAST.)
        • CORD, ELECTRIC 3PH (CE)
        • CORD, EXTERNAL (UK)
        • CORD, INTERNAL 3PH.
        • CORD, INTERNAL SRM20 (p)
        • CORD, POWER (EUR)
        • KEY
        • LARGE BELT Cogged
        • MOTOR, 1/2 220/50/1 (p)
        • MOTOR, 1/2HP 115/60/1 (p)
        • MOTOR, 220-380/50/3
        • NUT, HEX 10-32x1/8TH.
        • NUT, KEP 5/16-18x5/16
        • O-RING, RUBBER 4" DIA (p)
        • PIN, ROD END (SLIDE) (p)
        • POWER CORD, 115v (p)
        • POWER CORD, 220v (p)
        • PULLEY SWIVEL BRACKET
        • PULLEY, DRIVE AS17,5/8 (p)
        • Pulley, Vari-Speed
        • RETAINER, BELT (UPPER)(p)
        • RETAINER, RING
        • RETAINING RING
        • RETAINING RING, EXTERNAL
        • RING, RET (5101-37)
        • ROD END 3/8-24 LH
        • ROD, CONNECT (SC)
        • SCREW, HXHD 5/16-18x1-1/2
        • SHAFT VARIABLE SPEED
        • SLEEVE, BEARING REPLACEMENT ASSEM.
        • SMALL BELT Cogged
        • STATIONARY PULLY
        • STRAIN RELIEF, (CE)(p)
        • TYTON TIES (p)
        • WASHER, FLAT
        • WASHER, FLAT #10 SAE
        • WASHER, FLAT 3/8 USS , ZINC PLATED
        • WASHER, LOCK #10
        • WOODRUFF KEY #9
      • Vertical Shaft Assembly
        • BALL BEARING
        • BEARING, 5204ZZ
        • Gear, Bevel (vertical) (p)
        • RETAINER, RING
        • ROLL PIN, 5/16 x 1-1/2"
        • SPACER, VERT (M20)(p)
        • Vertical Shaft
        • WOODRUFF KEY #9
    • Food Mixer SRM20 (Year 2000) Model
      • Beater Head Assembly
        • BALL BEARING
        • BEATER HEAD ASSY.(p)
        • BEATER HEAD GEAR
        • BEATER HEAD SHAFT
        • HSNG,B.HEAD M20 (p)
        • LABEL,"ROTATION"
        • PIN, DRIVE 1/4 X 1
        • RETAINER, RING
        • RETAINING RING, EXTERNAL
        • RING, SPLASH (p)
        • SCREW, HXHD LH 3/8-24 X 1-1/4"
        • SET SCREW, 3/8-16 X 1-1/4
        • SPACER,B.HEAD (p)
        • WASHER, B.HEAD (M20)
        • WOODRUFF KEY #9
      • Bowl Lift Assembly
        • Bowl Lift Cam Assy
        • BOWL LIFT HOUSING
        • COLLAR, B.L. LEVER (p)
        • COLLAR, CONT.ROD
        • LEVER, BOWL LIFT (SRM20) (p)
        • NUT, HX 3/8-24x9/16x5/16
        • NUT, KEP 5/16-18x5/16
        • NUT, LOCK 5/16-24
        • NYLON SPACER
        • PIN, ROLL 3/16 x 1
        • ROD END RH 3/8-24 (p)
        • ROD, CONN.(M20 B.L.)(p)
        • SSCR,OVPT 5/16-24x1-1/8
        • WASHER, FLAT
        • Washer, Nylon (bowl Lift)
      • Bowl Support Assembly
        • COVER, MOVEABLE (p)
        • FRAME, (M12B,M20) (p)
        • GASKET, STRIP THIN BLACK (p)
        • GIBB, B.L.(M12,M20)(p)
        • NUT, KEP 5/16-18x5/16
        • PIN, BOWL SUPPORT (p)
        • PIN, ROD END (SLIDE) (p)
        • RING, RET (5101-37)
        • ROD END 3/8-24 LH
        • ROD, CONN.(M20 B.L.)(p)
        • SCREW, HXHD 5/16-18x1-3/4" PLTD
        • SCREW, HXHD 5/16-18x3/4
        • SLIDE, (M20) (p)
        • SUPPORT, BOWL (M20)
        • WASHER, FLAT
        • WASHER, LOCK 5/16x9/16
      • Housing Assembly
        • BOLT, CARR.SS 1/4-20x3/4
        • BOWL LIFT SAFETY SWITCH
        • BRACKET, BOWL SWITCH (p)
        • BRACKET, LOWER (SAFETY RING)(p)
        • BRACKET, UPPER (SAFETY RING)(p)
        • BUSHING, PLAS. 3/4x1-1/8 (p)
        • CONTACTOR  120V
        • Contactor, 110/50,60/1 (JPN)
        • CONTACTOR, 240/50 (p)
        • CONTACTOR, 240/60;220/50 (p)
        • COVER, HOUSING (p)
        • COVER,SLIDE (FIXED)(98)(p)
        • DECAL START/STOP
        • DRIVE SCREW
        • FOAM INSULATION
        • HOUSING, SRM20
        • INSULATOR, SWITCH
        • KNOB, TIMER
        • LABEL, START/STOP/TIMER (p)
        • MOUNT, CONT/STARTER (p)
        • NUT, ELASTIC STOP 4-40
        • NUT, HEX 1/4-20
        • NUT, HEX 10-32x1/8TH.
        • NUT, KEP 1/4-20
        • NUT, TIMMER.#C8118-1024-4
        • PANEL, REAR ACCESS (p)
        • PUSH BUTTON, START
        • PUSH BUTTON, STOP
        • Safety Guard Switch
        • SCREEN, M20 HOUSING (p)
        • SCREW, #12 SPANNER (p)
        • SCREW, 10-32 x 1/2 SPANNER
        • SCREW, CHHD M4-.7x6mm
        • SCREW, HD HXHD 1/4-20x1
        • SCREW, HXHD 4-40 x 3/4
        • SCREW, PPHD #12, 1" LONG
        • SCREW, PPHD 8-32x3/8
        • SCREW, PPHD ST .10-32X1/2
        • SLEEVE, LEG (WIP)
        • SPEED CONTROL LABEL
        • SPRING, TOP COVER (p)
        • STARTER, 1/2HP 6.0 (CE) (P)
        • STARTER, 380/50/3  1.6
        • STARTER, CSA 115/60,9.5 (p)
        • TIMER, 15 MINUTE
        • TOOL KIT, SECURITY (SP6.14)(p)
        • WASHER, FLAT #10 SAE
        • WASHER, FLAT #8
        • WASHER, LOCK #10
        • WASHER, LOCK #8
        • WASHER, LOCK 1/4x1/2
        • WASHER, STRAP 1/4ID,1/8TH (p)
      • Input Assembly
        • BALL BEARING
        • GEAR, INPUT PINION
        • INPUT ASSEM. SRM20
        • INPUT HOUSING
        • INPUT SHAFT
        • KEY
        • RETAINER, RING
        • RETAINING RING, EXTERNAL
        • SCREW, HD HXHD 1/4-20x1
        • WASHER, LOCK 1/4x1/2
        • WASHER, STRAP 1/4ID,1/8TH (p)
        • WOODRUFF KEY #9
      • Power Take off Assembly
        • 1/4" FLAT WASHER
        • BALL BEARING
        • BALL, STEEL 1/4"DIA.(p)
        • COUPLING- PTO ADAPTER
        • DEFLECTOR, LUBRICATION (p)
        • Gear, PTO Bevel (p)
        • GEAR, SPUR PTO
        • HOUSING, PTO BEARING (p)
        • PTO CAP
        • PTO HOUSING
        • PTO KNOB ASSY
        • RETAINER, RING
        • RETAINING RING, EXTERNAL
        • ROLL PIN, 5/16 x 1-1/4"
        • SCREW, HD HXHD 1/4-20x1
        • SCREW, HD HXHD 1/4-20x3/4
        • SCREW, SFHD SS 6-32x3/8
        • SHAFT, BEVEL GEAR (p)
        • SHAFT, PTO (M20)(p)
        • SPRING, 1/4OD;5/16 LONG (p)
        • WASHER, LOCK 1/4x1/2
        • WASHER, PTO S/S (p)
        • WOODRUFF KEY #9
      • Speed Control Assembly
        • CAM, SPEED CONTROL
        • COLLAR, CONT.ROD
        • CONTROL KNOB FOR LEVER SPEED
        • DENTENT DISC
        • Housing, Speed Control
        • HUB SPEED CONTROL
        • LEVER, CONTROL
        • NUT, HX 3/8-24x9/16x5/16
        • NUT, KEP 5/16-18x5/16
        • NYLON SPACER
        • ROD END RH 3/8-24 (p)
        • ROD, CONNECT (SC)
        • ROLL PIN (Bowl Lift)
        • SCREW, PPHD 1/4-20x1/2
        • SCREW, PPHD ST .10-32X1/2
        • Screw, SOCHD 10-32x3/4
        • SPRING, DET DISC
        • STRAP, DET.DISC SPRING (p)
        • WASHER, FLAT
        • WASHER, LOCK 1/4x1/2
        • Washer, Nylon (bowl Lift)
        • Washer, Spring B1250-040
      • Transmission
        • CLIP, SPRING (TRANS.CVR)(p)
        • COVER, TRANS. (NEW)
        • FOAM INSULATION
        • GEAR. INTERNAL
        • HOLDER, MAGNET (p)
        • HOUSING, TRANS.(MAGNET)(p)
        • LABEL, "SRM20"
        • MAGNET, SAFETY GUARD (p)
        • PIN, DOWEL 1/4x1/2
        • SCREW, HXHD 1/2-20x1
        • SCREW, PPHD ST .10-32X1/2
        • SCREW, SOCHD 10-32x1 (HARD)
        • WASHER, FLAT #10 SAE
        • WASHER, FLAT 1/2 USS
        • WASHER, LOCK #10
        • WASHER, LOCK 1/2x7/8
      • Vari-Speed Assembly
        • BALL BEARING
        • BASE, SWIVEL BRACKET (p)
        • BEARING
        • BRACKET, BELT RETAINER (p)
        • CLAMP, CORD (PLAST.)
        • CORD, ELECTRIC 3PH (CE)
        • CORD, EXTERNAL (UK)
        • CORD, INTERNAL 3PH.
        • CORD, INTERNAL SRM20 (p)
        • CORD, POWER (EUR)
        • KEY
        • LARGE BELT Cogged
        • MOTOR, 1/2 220/50/1 (p)
        • MOTOR, 1/2HP 115/60/1 (p)
        • MOTOR, 220-380/50/3
        • NUT, HEX 10-32x1/8TH.
        • NUT, KEP 5/16-18x5/16
        • O-RING, RUBBER 4" DIA (p)
        • PIN, ROD END (SLIDE) (p)
        • POWER CORD, 115v (p)
        • POWER CORD, 220v (p)
        • PULLEY SWIVEL BRACKET
        • PULLEY, DRIVE AS17,5/8 (p)
        • Pulley, Vari-Speed
        • RETAINER, BELT (UPPER)(p)
        • RETAINER, RING
        • RETAINING RING
        • RETAINING RING, EXTERNAL
        • RING, RET (5101-37)
        • ROD END 3/8-24 LH
        • ROD, CONNECT (SC)
        • SCREW, HXHD 5/16-18x1-1/2
        • SHAFT VARIABLE SPEED
        • SLEEVE, BEARING REPLACEMENT ASSEM.
        • SMALL BELT Cogged
        • STATIONARY PULLY
        • STRAIN RELIEF, (CE)(p)
        • TYTON TIES (p)
        • WASHER, FLAT
        • WASHER, FLAT #10 SAE
        • WASHER, FLAT 3/8 USS , ZINC PLATED
        • WASHER, LOCK #10
        • WOODRUFF KEY #9
      • Vertical Shaft Assembly
        • BALL BEARING
        • BEARING, 5204ZZ
        • Gear, Bevel (vertical) (p)
        • RETAINER, RING
        • ROLL PIN, 5/16 x 1-1/2"
        • SPACER, VERT (M20)(p)
        • Vertical Shaft
        • WOODRUFF KEY #9
    • Food Mixer SRM20 (Year 2003) Model
      • Beater Head Assembly
        • BALL BEARING
        • BEATER HEAD ASSY.(p)
        • BEATER HEAD GEAR
        • BEATER HEAD SHAFT
        • HSNG,B.HEAD M20 (p)
        • LABEL,"ROTATION"
        • PIN, DRIVE 1/4 X 1
        • RETAINER, RING
        • RETAINING RING, EXTERNAL
        • RING, SPLASH (p)
        • SCREW, HXHD LH 3/8-24 X 1-1/4"
        • SET SCREW, 3/8-16 X 1-1/4
        • SPACER,B.HEAD (p)
        • WASHER, B.HEAD (M20)
        • WOODRUFF KEY #9
      • Bowl Lift Assembly
        • Bowl Lift Cam Assy
        • BOWL LIFT HOUSING
        • COLLAR, B.L. LEVER (p)
        • COLLAR, CONT.ROD
        • LEVER, BOWL LIFT (SRM20) (p)
        • NUT, HX 3/8-24x9/16x5/16
        • NUT, KEP 5/16-18x5/16
        • NUT, LOCK 5/16-24
        • NYLON SPACER
        • PIN, ROLL 3/16 x 1
        • ROD END RH 3/8-24 (p)
        • ROD, CONN.(M20 B.L.)(p)
        • SSCR,OVPT 5/16-24x1-1/8
        • WASHER, FLAT
        • Washer, Nylon (bowl Lift)
      • Bowl Support Assembly
        • 20 QT BOWL, SS
        • COVER, MOVEABLE (p)
        • FRAME, (M12B,M20) (p)
        • GASKET, STRIP THIN BLACK (p)
        • GIBB, B.L.(M12,M20)(p)
        • NUT, KEP 5/16-18x5/16
        • PIN, BOWL SUPPORT (p)
        • PIN, ROD END (SLIDE) (p)
        • RING, RET (5101-37)
        • ROD END 3/8-24 LH
        • ROD, CONN.(M20 B.L.)(p)
        • SCREW, HXHD 5/16-18x1-3/4" PLTD
        • SCREW, HXHD 5/16-18x3/4
        • SLIDE, (M20) (p)
        • SUPPORT, BOWL (M20)
        • WASHER, FLAT
        • WASHER, LOCK 5/16x9/16
      • Housing Assembly
        • BOLT, CARR.SS 1/4-20x3/4
        • BOWL LIFT SAFETY SWITCH
        • BRACKET, BOWL SWITCH (p)
        • BRACKET, LOWER (SAFETY RING)(p)
        • BRACKET, UPPER (SAFETY RING)(p)
        • BUSHING, PLAS. 3/4x1-1/8 (p)
        • CHUTE, INGREDIENTS (p)
        • CONTACTOR  120V
        • Contactor, 110/50,60/1 (JPN)
        • CONTACTOR, 240/50 (p)
        • CONTACTOR, 240/60;220/50 (p)
        • COVER, HOUSING (p)
        • COVER,SLIDE (FIXED)(98)(p)
        • DECAL START/STOP
        • DRIVE SCREW
        • FOAM INSULATION
        • HOUSING, SRM20
        • INSULATOR, SWITCH
        • KNOB, TIMER
        • LABEL, START/STOP/TIMER (p)
        • LEFT SIDE SAFETY CAGE
        • MOUNT, CONT/STARTER (p)
        • NUT, ELASTIC STOP 4-40
        • NUT, HEX 1/4-20
        • NUT, HEX 10-32x1/8TH.
        • NUT, KEP 1/4-20
        • NUT, TIMMER.#C8118-1024-4
        • PANEL, REAR ACCESS (p)
        • PUSH BUTTON, START
        • PUSH BUTTON, STOP
        • RING, SAFETY (RIGHT) (p)
        • Safety Guard Switch
        • SCREEN, M20 HOUSING (p)
        • SCREW, #12 SPANNER (p)
        • SCREW, 10-32 x 1/2 SPANNER
        • SCREW, CHHD M4-.7x6mm
        • SCREW, HD HXHD 1/4-20x1
        • SCREW, HXHD 4-40 x 3/4
        • SCREW, PPHD #12, 1" LONG
        • SCREW, PPHD 8-32x3/8
        • SCREW, PPHD ST .10-32X1/2
        • SLEEVE, LEG (WIP)
        • SPEED CONTROL LABEL
        • SPRING, TOP COVER (p)
        • STARTER, 1/2HP 6.0 (CE) (P)
        • STARTER, 380/50/3  1.6
        • STARTER, CSA 115/60,9.5 (p)
        • TIMER, 15 MINUTE
        • TOOL KIT, SECURITY (SP6.14)(p)
        • TRANSFORMER, 440v (p)
        • WASHER, FLAT #10 SAE
        • WASHER, FLAT #8
        • WASHER, LOCK #10
        • WASHER, LOCK #8
        • WASHER, LOCK 1/4x1/2
        • WASHER, STRAP 1/4ID,1/8TH (p)
      • Input Assembly
        • BALL BEARING
        • GEAR, INPUT PINION
        • INPUT ASSEM. SRM20
        • INPUT HOUSING
        • INPUT SHAFT
        • KEY
        • RETAINER, RING
        • RETAINING RING, EXTERNAL
        • SCREW, HD HXHD 1/4-20x1
        • WASHER, LOCK 1/4x1/2
        • WASHER, STRAP 1/4ID,1/8TH (p)
        • WOODRUFF KEY #9
      • Power Take off Assembly
        • 1/4" FLAT WASHER
        • BALL BEARING
        • BALL, STEEL 1/4"DIA.(p)
        • COUPLING- PTO ADAPTER
        • DEFLECTOR, LUBRICATION (p)
        • Gear, PTO Bevel (p)
        • GEAR, SPUR PTO
        • HOUSING, PTO (WRAP) (p)
        • HOUSING, PTO BEARING (WRAP)(p)
        • PTO CAP
        • PTO KNOB ASSY
        • RETAINER, RING
        • RETAINING RING, EXTERNAL
        • ROLL PIN, 5/16 x 1-1/4"
        • SCREW, HD HXHD 1/4-20x1
        • SCREW, HD HXHD 1/4-20x3/4
        • SCREW, SFHD SS 6-32x3/8
        • SHAFT, BEVEL GEAR (p)
        • SHAFT, PTO (M20)(p)
        • SPRING, 1/4OD;5/16 LONG (p)
        • WASHER, LOCK 1/4x1/2
        • WASHER, PTO S/S (p)
        • WOODRUFF KEY #9
      • Speed Control Assembly
        • CAM, SPEED CONTROL
        • COLLAR, CONT.ROD
        • CONTROL KNOB FOR LEVER SPEED
        • DENTENT DISC
        • Housing, Speed Control
        • HUB SPEED CONTROL
        • LEVER, CONTROL
        • NUT, HX 3/8-24x9/16x5/16
        • NUT, KEP 5/16-18x5/16
        • NYLON SPACER
        • ROD END RH 3/8-24 (p)
        • ROD, CONNECT (SC)
        • ROLL PIN (Bowl Lift)
        • SCREW, PPHD 1/4-20x1/2
        • SCREW, SOCHD 10-32 x 1/2
        • Screw, SOCHD 10-32x3/4
        • SPRING, DET DISC
        • STRAP, DET.DISC SPRING (p)
        • WASHER, FLAT
        • WASHER, LOCK 1/4x1/2
        • Washer, Nylon (bowl Lift)
        • Washer, Spring B1250-040
      • Transmission
        • CLIP, SPRING (TRANS.CVR)(p)
        • COVER, TRANS. (NEW)
        • FOAM INSULATION
        • GEAR. INTERNAL
        • HOLDER, MAGNET (p)
        • HOUSING, TRANS.(MAGNET)(p)
        • LABEL, "SRM20"
        • MAGNET, SAFETY GUARD (p)
        • PIN, DOWEL 1/4x1/2
        • SCREW, HXHD 1/2-20x1
        • SCREW, PPHD ST .10-32X1/2
        • SCREW, SOCHD 10-32x1 (HARD)
        • WASHER, FLAT #10 SAE
        • WASHER, FLAT 1/2 USS
        • WASHER, LOCK #10
        • WASHER, LOCK 1/2x7/8
      • Vari-Speed Assembly
        • 1/4" FLAT WASHER
        • BALL BEARING
        • BASE, SWIVEL BRACKET (p)
        • BOLT, HHTB 1/4-20x1-1/2
        • BRACKET, BELT RETAINER (p)
        • CLAMP, CORD (PLAST.)
        • CORD, ELECTRIC 3PH (CE)
        • CORD, EXTERNAL (UK)
        • CORD, INTERNAL 3PH.
        • CORD, INTERNAL SRM20 (p)
        • CORD, POWER (EUR)
        • KEY
        • LARGE BELT Cogged
        • MOTOR, 1/2 220/50/1 (p)
        • MOTOR, 1/2HP 115/60/1 (p)
        • MOTOR, 220-380/50/3
        • NUT, HEX 10-32x1/8TH.
        • NUT, KEP 1/4-20
        • NUT, KEP 5/16-18x5/16
        • O-RING, RUBBER 4" DIA (p)
        • PIN, ROD END (SLIDE) (p)
        • POWER CORD, 115v (p)
        • POWER CORD, 220v (p)
        • PULLEY SWIVEL BRACKET
        • PULLEY, DRIVE AS17,5/8 (p)
        • Pulley, Vari-Speed
        • RETAINER, BELT (UPPER)(p)
        • RETAINER, RING
        • RETAINING RING
        • RETAINING RING, EXTERNAL
        • RING, RET (5101-37)
        • ROD END 3/8-24 LH
        • ROD, CONNECT (SC)
        • SHAFT VARIABLE SPEED
        • SMALL BELT Cogged
        • STATIONARY PULLY
        • STRAIN RELIEF, (CE)(p)
        • TYTON TIES (p)
        • WASHER, FLAT
        • WASHER, FLAT #10 SAE
        • WASHER, FLAT 3/8 USS , ZINC PLATED
        • WASHER, LOCK #10
        • WHEEL,POLY (H20-4)(p)
        • WOODRUFF KEY #9
      • Vertical Shaft Assembly
        • BALL BEARING
        • BEARING, 5204ZZ
        • Gear, Bevel (vertical) (p)
        • RETAINER, RING
        • ROLL PIN, 5/16 x 1-1/2"
        • SPACER, VERT (M20)(p)
        • Vertical Shaft
        • WOODRUFF KEY #9
  • SRM30 Food Mixer
    • Food Mixer SRM30 (Year 1993) Model
      • Beater Head Assembly
        • BEARING (6205LL)
        • BEATER HEAD GEAR PINION
        • BEATER HEAD SHAFT
        • BEATER HEAD SPACER
        • DRIVE PIN
        • HSNG,B.HEAD M30 (p)
        • LABEL,"ROTATION"
        • RETAINING RING
        • RETAINING RING INERNAL
        • RING,SPLASH (p)
        • SCREW, HXHD LH 3/8-24 X 1-1/4"
        • SPACER,B.HEAD GEAR
        • WASHER, SS B.HEAD
        • WOODRUFF KEY #9
        • WSHR,NYFL7/8x1-5/8x1/32
      • Bowl Lift Assembly
        • Bowl Lift Cam Assy
        • BOWL LIFT HOUSING
        • COLLAR, CONT.ROD
        • NUT, HX 3/8-24x9/16x5/16
        • NUT, KEP 5/16-18x5/16
        • NYLON SPACER
        • PIN, ROLL 3/16 x 1
        • ROD END RH 3/8-24 (p)
        • ROD,CONNECT.(SLIDE)(p)
        • SCREW, SOCHD 10-32-1/4
        • WASHER, FLAT 5/16 SAE
        • Washer, Nylon (bowl Lift)
      • Bowl Support Assembly
        • CLAMP,BOWL (30)(p)
        • COVER,SLIDE (MOV.)(p)
        • FRAME,B.L. M30 (p)
        • GASKET STRIP
        • GIBB,B.LIFT (p)
        • NUT, KEP 5/16-18x5/16
        • PIN, BOWL SUPPORT (p)
        • PIN, ROD END (SLIDE) (p)
        • RING, RET (5101-37)
        • ROD END 3/8-24 LH
        • ROD,CONNECT.(SLIDE)(p)
        • SCR HXHD
        • SCR,HXHD 3/8-16x2
        • SCREW, HXHD 5/16-18x3/4
        • SLIDE,B.L. M30 (p)
        • SUPPORT,BOWL M30 (p)
        • WASHER, FLAT
        • WASHER, FLAT 3/8 USS , ZINC PLATED
        • WASHER, FLAT 5/16 SAE
        • WASHER, SHIM
        • WASHER, SPRING 4/16
        • WSHR,LOCK 3/8 S/S
      • Housing Assembly
        • BRACKET, BOWL SWITCH (p)
        • BRACKET, LEFT GUARD SWITCH
        • CAP 3 INCH BASE
        • CAP, CRM 1/2" (SHIPPING)(p)
        • CONT,460/60
        • CONTACTOR  120V
        • CONTACTOR, 240/50 (p)
        • CONTACTOR, 240/60;220/50 (p)
        • COVER, HOUSING
        • COVER,SLIDE (FIXED)
        • DECAL, HAND GUARD
        • FOAM INSULATION
        • KNOB, TIMER
        • LABEL, START/STOP/TIMER (p)
        • MOUNT, CONT/STARTER (p)
        • NUT, ELASTIC STOP 4-40
        • NUT, HEX 10-32x1/8TH.
        • NUT, KEP 3/8-16
        • NUT, TIMMER.#C8118-1024-4
        • PANEL,REAR ACCESS (p)
        • SCREW, CHHD M4-.7x6mm
        • SCREW, HXHD 4-40 x 3/4
        • SCREW, PPHD #12, 1" LONG
        • SCREW, PPHD 8-32x3/8
        • SCREW, PPHD ST .10-32X1/2
        • SPRING, TOP COVER (p)
        • STTR,CSA 115/60,12.5 (3/4 HP)
        • TIMER, 15 MINUTE
        • WASHER, FLAT #10 SAE
        • WASHER, FLAT #8
        • WASHER, FLAT 5/16 SAE
        • WASHER, FLAT 5/8 SAE
        • WASHER, LOCK #10
        • WASHER, LOCK #8
      • Input Assembly
        • BALL BEARING
        • INPUT HOUSING
        • KEY
        • RETAINER, RING
        • RETAINING RING, EXTERNAL
        • SCREW, HD HXHD 1/4-20x1
        • SHAFT,INPUT
        • SPUR GEAR-INPUT PINION ONLY
        • WASHER, STRAP 1/4ID,1/8TH (p)
        • WOODRUFF KEY #9
      • Power Take off Assembly
        • BALL BEARING
        • BALL, STEEL 1/4"DIA.(p)
        • COUPLING- PTO ADAPTER
        • Gear, PTO Bevel (p)
        • GEAR, PTO SPUR
        • PTO CAP
        • PTO HOUSING
        • PTO KNOB ASSY
        • RETAINER, RING
        • RETAINING RING, EXTERNAL
        • ROLL PIN, 5/16 x 1-1/4"
        • SCREW, HD HXHD 1/4-20x1
        • SHAFT, PTO
        • SPRING, 1/4OD;5/16 LONG (p)
        • WASHER, LOCK 1/4x1/2
        • WOODRUFF KEY #9
      • Speed Control Assembly
        • CAM, SPEED CONTROL
        • COLLAR, CONT.ROD
        • CONTROL KNOB FOR LEVER SPEED
        • Housing, Speed Control
        • HUB SPEED CONTROL
        • NUT, HX 3/8-24x9/16x5/16
        • NUT, KEP 5/16-18x5/16
        • NYLON SPACER
        • ROD END RH 3/8-24 (p)
        • ROD, CONNECT (SC)
        • ROLL PIN (Bowl Lift)
        • SCREW, PPHD 1/4-20x1/2
        • SCREW, PPHD ST .10-32X1/2
        • Screw, SOCHD 10-32x3/4
        • SPRING, DET DISC
        • STRAP, DET.DISC SPRING (p)
        • WASHER, FLAT 5/16 SAE
        • WASHER, LOCK 1/4x1/2
        • Washer, Nylon (bowl Lift)
        • Washer, Spring B1250-040
      • Transmission
        • CLIP, SPRING (TRANS.CVR)(p)
        • HSNG,TRANS. M30
        • INTERNAL GEAR
        • SCREW, HD HXHD 1/4-20x1
        • SCREW, HXHD 1/2-20x1
        • WASHER, FLAT #10 SAE
        • WASHER, FLAT 1/2 USS
        • WASHER, LOCK #10
        • WASHER, LOCK 1/2x7/8
      • Vari-Speed Assembly
        • BALL BEARING
        • BASE, SWIVEL BRACKET (p)
        • BRKT,BELT RETAINER (p)
        • CLAMP, CORD (PLAST.)
        • KEY
        • NUT, KEP 5/16-18x5/16
        • O-RING, RUBBER 4" DIA (p)
        • PIN, ROD END (SLIDE) (p)
        • POWER CORD, 115v (p)
        • POWER CORD, 220v (p)
        • PULLEY SWIVEL BRACKET
        • PULLEY, DRIVE
        • PULLEY, DRIVE
        • PULLEY- VARIABLE SPEED
        • RETAINER, RING
        • RETAINER,BELT (UPPER)
        • RETAINING RING
        • RETAINING RING, EXTERNAL
        • RING, RET (5101-37)
        • ROD END 3/8-24 LH
        • ROD, CONNECT (SC)
        • SCREW, HXHD 5/16-18x1-1/2
        • SLEEVE, BEARING REPLACEMENT ASSEM.
        • V-BELT  COGGED
        • V-BELT, COGGED
        • VARI-SPEED SHAFT
        • WASHER, FLAT
        • WASHER, FLAT 3/8 USS , ZINC PLATED
        • WASHER, FLAT 5/16 SAE
        • WASHER, LOCK 1/4x1/2
        • WASHER, STRAP 1/4ID,1/8TH (p)
        • WOODRUFF KEY #9
      • Vertical Shaft Assembly
        • BALL BEARING
        • PIN, ROLL 3/16 X 1-1/2"
        • RETAINING RING INERNAL
        • ROLL PIN, 5/16 x 1-1/2"
        • SHAFT,VERTICAL (p)
        • SPACER,VERT.SHAFT
        • WOODRUFF KEY #9
    • Food Mixer SRM30 (Year 1994) Model
      • Beater Head Assembly
        • BEARING (6205LL)
        • BEATER HEAD GEAR PINION
        • BEATER HEAD SHAFT
        • BEATER HEAD SPACER
        • DRIVE PIN
        • HSNG,B.HEAD M30 (p)
        • LABEL,"ROTATION"
        • RETAINING RING
        • RETAINING RING INERNAL
        • RING,SPLASH (p)
        • SCREW, HXHD LH 3/8-24 X 1-1/4"
        • SET SCREW, 3/8-16 X 1-1/4
        • SPACER,B.HEAD GEAR
        • WASHER, SS B.HEAD
        • WOODRUFF KEY #9
      • Bowl Lift Assembly
        • Bowl Lift Cam Assy
        • BOWL LIFT HOUSING
        • COLLAR, CONT.ROD
        • NUT, HX 3/8-24x9/16x5/16
        • NUT, KEP 5/16-18x5/16
        • NUT, LOCK 5/16-24
        • NYLON SPACER
        • PIN, ROLL 3/16 x 1
        • ROD END RH 3/8-24 (p)
        • ROD,CONNECT.(SLIDE)(p)
        • SSCR,OVPT 5/16-24x1-1/8
        • WASHER, FLAT 5/16 SAE
        • Washer, Nylon (bowl Lift)
      • Bowl Support Assembly
        • CLAMP,BOWL (30)(p)
        • COVER,SLIDE (MOV.)(p)
        • FRAME,B.L. M30 (p)
        • GASKET STRIP
        • GIBB,B.LIFT (p)
        • NUT, KEP 5/16-18x5/16
        • PIN, BOWL SUPPORT (p)
        • PIN, ROD END (SLIDE) (p)
        • RING, RET (5101-37)
        • ROD END 3/8-24 LH
        • ROD,CONNECT.(SLIDE)(p)
        • SCR HXHD
        • SCR,HXHD 3/8-16x2
        • SCREW, HXHD 5/16-18x3/4
        • SLIDE,B.L. M30 (p)
        • SUPPORT,BOWL M30 (p)
        • WASHER, FLAT
        • WASHER, FLAT 3/8 USS , ZINC PLATED
        • WASHER, FLAT 5/16 SAE
        • WASHER, SHIM
        • WASHER, SPRING 4/16
        • WSHR,LOCK 3/8 S/S
      • Housing Assembly
        • BRACKET, BOWL SWITCH (p)
        • BRACKET, LEFT GUARD SWITCH
        • CAP 3 INCH BASE
        • CAP, CRM 1/2" (SHIPPING)(p)
        • CONT,460/60
        • CONTACTOR  120V
        • CONTACTOR, 240/50 (p)
        • CONTACTOR, 240/60;220/50 (p)
        • COVER, HOUSING
        • COVER,SLIDE (FIXED)
        • DECAL, HAND GUARD
        • FOAM INSULATION
        • KNOB, TIMER
        • LABEL, START/STOP/TIMER (p)
        • MOUNT, CONT/STARTER (p)
        • NUT, ELASTIC STOP 4-40
        • NUT, HEX 10-32x1/8TH.
        • NUT, KEP 3/8-16
        • NUT, TIMMER.#C8118-1024-4
        • PANEL,REAR ACCESS (p)
        • PUSH BUTTON, STOP
        • SCREW, CHHD M4-.7x6mm
        • SCREW, HXHD 4-40 x 3/4
        • SCREW, PPHD #12, 1" LONG
        • SCREW, PPHD 8-32x3/8
        • SCREW, PPHD ST .10-32X1/2
        • SPRING, TOP COVER (p)
        • STTR,CSA 115/60,12.5 (3/4 HP)
        • TIMER, 15 MINUTE
        • TRANSFORMER, 440v (p)
        • WASHER, FLAT #10 SAE
        • WASHER, FLAT #8
        • WASHER, FLAT 5/16 SAE
        • WASHER, FLAT 5/8 SAE
        • WASHER, LOCK #10
        • WASHER, LOCK #8
      • Input Assembly
        • BALL BEARING
        • INPUT HOUSING
        • KEY
        • RETAINER, RING
        • RETAINING RING, EXTERNAL
        • SCREW, HD HXHD 1/4-20x1
        • SHAFT,INPUT
        • SPUR GEAR-INPUT PINION ONLY
        • WASHER, STRAP 1/4ID,1/8TH (p)
        • WOODRUFF KEY #9
      • Power Take off Assembly
        • 1/4" FLAT WASHER
        • BALL BEARING
        • BALL, STEEL 1/4"DIA.(p)
        • BEVEL GEAR, PINION ONLY
        • COUPLING- PTO ADAPTER
        • DEFLECTOR, LUBRICATION (p)
        • GEAR, PTO SPUR
        • PTO CAP
        • PTO HOUSING
        • PTO KNOB ASSY
        • RETAINER, RING
        • RETAINING RING, EXTERNAL
        • ROLL PIN, 5/16 x 1-1/4"
        • SCREW, HD HXHD 1/4-20x1
        • SHAFT, PTO
        • SPRING, 1/4OD;5/16 LONG (p)
        • WASHER, LOCK 1/4x1/2
        • WOODRUFF KEY #9
      • Speed Control Assembly
        • CAM, SPEED CONTROL
        • COLLAR, CONT.ROD
        • CONTROL KNOB FOR LEVER SPEED
        • Housing, Speed Control
        • HUB SPEED CONTROL
        • NUT, HX 3/8-24x9/16x5/16
        • NUT, KEP 5/16-18x5/16
        • NYLON SPACER
        • ROD END RH 3/8-24 (p)
        • ROD, CONNECT (SC)
        • ROLL PIN (Bowl Lift)
        • SCREW, PPHD 1/4-20x1/2
        • SCREW, PPHD ST .10-32X1/2
        • Screw, SOCHD 10-32x3/4
        • SPRING, DET DISC
        • STRAP, DET.DISC SPRING (p)
        • WASHER, FLAT 5/16 SAE
        • WASHER, LOCK 1/4x1/2
        • Washer, Nylon (bowl Lift)
        • Washer, Spring B1250-040
      • Transmission
        • CLIP, SPRING (TRANS.CVR)(p)
        • FOAM INSULATION
        • HSNG,TRANS. M30
        • INTERNAL GEAR
        • LABEL, UNIVEX (p)
        • PIN, DOWEL 1/4x1/2
        • SCREW, HD HXHD 1/4-20x1